Case 2

Standards

Sanitary

AS 1976: Vitreous China Used in Sanitary Appliances

AS 3500: Plumbing and drainage

• Part 2: Sanitary plumbing and drainage

AS 4023 – Non-vitreous china used in sanitary appliances

ASTM C282 – Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)

ASTM C286 – Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

ASTM C448 – Standard Test Methods for Abrasion Resistance of Porcelain Enamels

ASTM C614 – Standard Test Method for Alkali Resistance of Porcelain Enamels

ASTM C715 – Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis

ASTM C756 – Standard Test Method for Cleanability of Surface Finishes

ASTM C810 – Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry

ASTM C839 – Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

ASTM C1203 – Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

BS EN 198: Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods

BS EN 232: Baths. Connecting dimensions

BS EN 274: Waste fittings for sanitary appliances

• Part 1: Requirements
• Part 2: Test methods
• Part 3: Quality control

BS 3402: Specification for quality of vitreous china sanitary appliances

BS 4305-2: Baths for domestic purposes made of acrylic material. Specification for connecting dimensions

BS 4531: Vitreous and porcelain enamels – Release of lead and cadmium from enamelled ware in contact with food

• Part 1: Method of test
• Part 2: Permissible limits

BS ISO 4532: Vitreous and porcelain enamels – Determination of the resistance of enamelled articles to impact – Pistol test

ISO 4534: Vitreous and porcelain enamels – Determination of fluidity behaviour – Fusion flow test

BS 6465: Sanitary installations

• Part 1: Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
• BS 6465-2: Code of practice for space requirements for sanitary appliances
• Part 3: Code of practice for the selection, installation and maintenance of sanitary and associated appliances

BS ISO 8289: Vitreous and porcelain enamels – Low voltage test for detecting and locating defects

BS ISO 8291: Vitreous and porcelain enamels – Method of test of self-cleaning properties

BS ISO 15695: Vitreous and porcelain enamels – Determination of scratch resistance of enamel finishes

BS ISO 28706: Vitreous and porcelain enamels – Determination of resistance to chemical corrosion

• Part 1: Determination of resistance to chemical corrosion by acids at room temperature
• Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
• Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
• Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel

ISO 1772: Laboratory crucibles in porcelain and silica

ISO 1775: Porcelain laboratory apparatus – Requirements and methods of test

ISO 2723: Vitreous and porcelain enamels for sheet steel – Production of specimens for testing

ISO 2724: Vitreous and porcelain enamels for cast iron – Production of specimens for testing

ISO 2745: Vitreous and porcelain enamels – Determination of resistance to hot sodium hydroxide

ISO 4791-1: Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica – Names for items of apparatus

BS EN 12056-2: Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation

ISO 13806: Vitreous and porcelain enamels – Corrosion tests in closed systems

SS 205: Vitreous china washdown WC pans – Dimensions and functional requirements

SS 396: Vitreous china WC pans for use with 6 L flush valves

SS 574 – 2: Specification for dual flush low capacity water closet (WC) up to 4.5/3.0 litres capacity – WC pans

Waterproofing

AS 3740 – Waterproofing of domestic wet areas

ASTM D5295 / D5295M – Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5957 – Standard Guide for Flood Testing Horizontal Waterproofing Installations

BS 8000-0: Workmanship on construction sites. Introduction and general principles

SS CP 82: Code of practice- waterproofing of reinforced concrete buildings

Sealant

ASTM C510 – Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

ASTM C603 – Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

ASTM C639: Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

ASTM C713 – Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound

ASTM C719 – Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

ASTM C731 – Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

ASTM C736 – Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

ASTM C771 – Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

ASTM C792 – Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

ASTM C794 – Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

ASTM C910 – Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

ASTM C972 – Standard Test Method for Compression-Recovery of Tape Sealant

ASTM C1135 – Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

ASTM C1183 / C1183M – Standard Test Method for Extrusion Rate of Elastomeric Sealants

ASTM C1193 – Standard Guide for Use of Joint Sealants

ASTM C1216 / C1216M – Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

ASTM C1246 – Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

ASTM C1248 – Standard Test Method for Staining of Porous Substrate by Joint Sealants

ASTM C1299 – Standard Guide for Use in Selection of Liquid-Applied Sealants

ASTM D2202 – Standard Test Method for Slump of Sealants

ASTM D2203 – Standard Test Method for Staining from Sealants

ASTM D2452 – Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

BS EN 196: Method of testing cement

• Part 1: Determination of strength
• Part 2: Chemical analysis of cement
• Part 3: Determination of setting times and soundness;
• Part 5: Pozzolanicity test for pozzolanic cement
• Part 6: Determination of fineness
• Part 7: Methods of taking and preparing samples of cement

BS 3712: Building and construction sealants

• Part 1: Methods of test for homogeneity, relative density and penetration
• Part 2: Methods of test for seepage, staining, shrinkage, shelf life and paintability
• Part 3: Methods of test for application life, skinning properties and tack-free time
• Part 4: Method of test for adhesion in peel

BS 4550: Methods of testing cement

• Part 0: General introduction
• Part 3.1: Methods of testing cement. Physical tests. Introduction
• Part 3.8: Methods of testing cement. Physical tests. Test for heat of hydration
• Part 6: Methods of testing cement. Standard sand for mortar cubes

BS ISO 6927: Buildings and civil engineering works – Sealants – Vocabulary

BS ISO 8339: Building construction – Sealants – Determination of tensile properties (Extension to break)

BS ISO 8340: Building construction – Sealants – Determination of tensile properties at maintained extension

BS ISO 8394-1: Building construction – Jointing products – Determination of extrudability of sealants

BS ISO 9046: Building construction – Jointing products – Determination of adhesion/cohesion properties of sealants at constant temperature

BS ISO 9047: Building construction – Jointing products – Determination of adhesion/cohesion properties of sealants at variable temperatures

BS ISO 10563: Building construction – Sealants – Determination of change in mass and volume

BS ISO 10590: Building construction – Sealants – Determination of tensile properties of sealants at maintained extension after immersion in water

BS ISO 10591:  Building construction – Sealants – Determination of adhesion/cohesion properties of sealants after immersion in water

BS ISO 11431: Building construction – Jointing products – Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

BS ISO 11432: Building construction – Sealants – Determination of resistance to compression

BS EN ISO 11600: Building construction – Jointing products – Classification and requirements for sealants

BS ISO 13638: Building construction – Sealants – Determination of resistance to prolonged exposure to water

ISO 14656: Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

Building construction – Jointing products – Classification and requirements for sealants

ISO 1881-131: Testing concrete. Methods for testing cement in a reference concrete

ISO 9048: Building construction – Jointing products – Determination of extrudability of sealants using standardized apparatus