Case 3

Navigation

Standards

BS 476-3 Fire tests on building materials and structures. Classification and method of test for external fire exposure to roofs

BS EN 12326-1 Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate

BS 690-6 Asbestos-cement slates and sheets. Fittings for use with corrugated sheets (Witthdrawn)

BS EN 13707 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS EN ISO 8990 Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box

BS EN 13168:2012+A1 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification

BS 1202-2 Specification for nails. Copper nails

BS 1202-3 Specification for nails. Aluminium nails

BS 1521 Specification for waterproof building papers

BS 1521 Specification for waterproof building papersBS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

BS 2830 Specification for suspended access equipment (suspended chairs, traditional steeplejack’s seats, work cages, cradles and platforms) for use in the building, engineering construction, steeplejack and cleaning industries (Withdraw)

BS 4841-3 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes

BS 4868 Specification for profiled aluminium sheet for building

Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS EN 1995-1-1: Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS 5427 Code of practice for the use of profiled sheet for roof and wall cladding on buildings

BS 5534 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS EN 13162 Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification

BS 5803-2 Thermal insulation for use in pitched roof spaces in dwellings. Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing

BS 5803-3 Thermal insulation for use in pitched roof spaces in dwellings. Specification for cellulose fibre thermal insulation for application by blowing

BS 5803-4 Thermal insulation for use in pitched roof spaces in dwellings. Methods for determining flammability and resistance to smouldering

BS 5803-5 Thermal insulation for use in pitched roof spaces in dwellings. Specification for installation of man-made mineral fibre and cellulose fibre insulation

BS 5918 Solar heating systems for domestic hot water. Code of practice for design and installation

BS EN 1993-1-3 Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting

BS 5950-7 Structural use of steelwork in building. Specification for materials and workmanship: cold formed sections (Withdrawn)

BS 6100-6 Building and civil engineering. Vocabulary. Construction parts

BS 6100-11 Building and civil engineering. Vocabulary. Performance characteristics, measurement and joints

BS 6229 Flat roofs with continuously supported coverings. Code of practice

BS EN 1991-1-3 Eurocode 1. Actions on structures. General actions. Snow loads

BS 6915:2001+A1 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

BS 6925 Specification for mastic asphalt for building and civil engineering (limestone aggregate)

BS 7021 Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam

BS EN 14975:2006+A1 Loft ladders. Requirements, marking and testing

BS 7916 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes (WIthdrawn)

BS 8000-4 Workmanship on building sites. Code of practice for waterproofing / BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

BS 8103-3 Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing

BS 8217 Reinforced bitumen membranes for roofing. Code of practice

BS 8218 Code of practice for mastic asphalt roofing

BS 8219:2001+A1 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice

DD ISO/PAS 11154 Road vehicles. Roof load carriers

BS EN 490 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications

BS EN 491 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods

BS EN 492 Fibre-cement slates and fittings. Product specification and test methods

BS EN 494:2012+A1 Fibre-cement profiled sheets and fittings. Product specification and test methods

BS EN 495-5 Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing

BS EN 501 Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet

BS EN 502 Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet

BS EN 504 Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet

BS EN 505 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet

BS EN 506 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet

BS EN 507 Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet

BS EN 508-1 Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet. Steel

BS EN 508-2 BS EN 508-2 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Aluminium

BS EN 508-3 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Stainless steel

BS EN 516 Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps

BS EN 517 Prefabricated accessories for roofing. Roof safety hooks

BS EN 534:2006+A1 Corrugated bitumen sheets. Product specification and test methods

BS EN 538 Clay roofing tiles for discontinuous laying. Flexural strength test

BS EN 539-1 Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test

BS EN 539-2 Clay roofing tiles for discontinuous laying. Determination of physicalcharacteristics. Test for frost resistance

BS EN 544 Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods

BS EN 595 Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour

BS EN 988 Zinc and zinc alloys. Specification for rolled flat products for building

BS EN 1013:2012+A1 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods

BS EN 1024 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics

BS EN 1107-1 Flexible sheets for waterproofing. Determination of dimensional stability. Bitumen sheets for roof waterproofing

BS EN 1107-2 Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing

BS EN 1108 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes

BS EN 1109 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature

BS EN 1110 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature

BS EN 1172 Copper and copper alloys. Sheet and strip for building purposes

DD CEN/TS 1187 Test methods for external fire exposure to roofs

BS EN 1296 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature

BS EN 1304 Clay roofing tiles and fittings. Product definitions and specifications

BS EN 1804-1 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Support units and general requirements

BS EN 1804-2 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Power set legs and rams

BS EN 1844 Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing

BS EN 1847 Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water

BS EN 1848-1 Flexible sheets for waterproofing. Determination of length, width and straightness. Bitumen sheets for roof waterproofing

BS EN 1848-2 Flexible sheets for waterproofing. Determination of length, width and straightness. Plastic and rubber sheets for roof waterproofing

BS EN 1849-1 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing

BS EN 1849-2 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets

BS EN 1850-1 Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing

BS EN 1850-2 Flexible sheets for waterproofing. Determination of visible defects. Plastic and rubber sheets for roof waterproofingBS EN 1928:2000 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness

BS EN 1928 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness.

BS EN 1931 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties

BS EN 10169 Continuously organic coated (coil coated) steel flat products. Technical delivery conditionsContinuously organic coated (coil coated) steel flat products. Technical delivery conditions

BS EN 12039 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules

BS EN 12056-3 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 12310-1 Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing

BS EN 12310-2 Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Plastic and rubber sheets for roof waterproofing

BS EN 12311-1 Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing

BS EN 12311-2 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing

BS EN 12316-1 Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing

BS EN 12316-2 Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing

BS EN 12317-1 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints

BS EN 12317-2 Flexible sheets for waterproofing. Determination of shear resistance of joints. Plastic and rubber sheets for roof waterproofing

BS EN 12326-2 Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate

BS EN 12467 Fibre-cement flat sheets. Product specification and test methods

BS EN 12588 Lead and lead alloys. Rolled lead sheet for building purposes

BS EN 12691 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact

BS EN 12730 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading

BS EN 12871 Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls

BS EN 13111 Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration

BS EN 13416 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling

BS EN 13583 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance

91/13906 DC Thermoplastic roofing and sealing sheets. Determination of tear resistance. Trapezoidal test specimen method (prEN 495-2)

91/13907 DC Thermoplastic and elastomeric roofing and sealing sheets. Determination of split pressure resistance (prEN 495-3)

91/13908 DC Thermoplastic and elastomeric roofing and sealing sheets. Determination of water vapour transmission properties (prEN 495-4)

91/38881 DC Rubber, vulcanized. EPDM and blends of EPDM-butyl non-reinforced, non-backed roofing sheet. Specification (ISO/DIS 4634)

BS 4841-2 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings

BS EN 1297 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water

96/104019 DC prEN 503. Roofing products from metal sheet. Specification for fully supported roofing products of lead sheet

97/103069 DC prEN 12871-1. Wood-based panels. Structural roof decking on joists. Part 1. Performance specifications

97/103070 DC Pren 12871-2 – Wood-based Panels – Structural Roof Decking On Joists – Part 2: Performance Requirements

NEN NPR CEN/TS 12872 Wood-based Panels – Guidance On The Use Of Load-bearing Boards In Floors, Walls And Roofs

BS EN 12951 Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods

97/704453 DC Road vehicles. Roof load carriers. Part 2. Accessories and their attachments to roof bars for special purpose applications (ISO/DIS 11154-2)

97/704454 DC Road vehicles. Roof load carriers. Part 3. Specific purpose roof devices (ISO/DIS 11154-3)

BS EN 13141-5 Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices

BS EN 13707 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS EN 13579 Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation

BS EN 12326-1 Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate

BS EN 13693 Precast concrete products. Special roof elements

EN 12056-3 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 1296 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature

BS EN 13859-1 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing

BS EN 13956 Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics

BS 6229 Flat roofs with continuously supported coverings. Code of practice

BS EN 13948 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration

BS EN 14064-1 Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation

BS EN 1804-3 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Hydraulic control systems

BS EN ISO 12567-2 Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Roof windows and other projecting windows

EN 14209 Preformed Plasterboard Cornices – Definitions, Requirements And Test Methods

ISO/PAS 11154 Road vehicles – Roof load carriers

BS EN 14437 Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method

BS 5534:2014+A1 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS EN 13501-5 Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests

BS EN 1304 Clay roofing tiles and fittings. Product definitions and specifications

BS 416-1 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems

BS EN 491 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods

BS EN 494 Fibre-cement profiled sheets and fittings. Product specification and test methods

BS EN 492 Fibre-cement slates and fittings. Product specification and test methods

BS 690-5 Asbestos-cement slates and sheets. Lining sheets and panels

BS EN 13707 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS 6925 Specification for mastic asphalt for building and civil engineering (limestone aggregate)

BS EN 316 Wood fibre boards. Definition, classification and symbols

BS EN 321 Wood-based panels. Determination of moisture resistance under cyclic test conditions

BS EN 322 Wood-based panels. Determination of moisture content

BS EN 323 Wood-based panels. Determination of density

BS EN 324-2 Wood-based panels. Determination of dimensions of boards. Determination of squareness and edge straightness

BS EN 325 Wood-based panels. Determination of dimensions of test pieces

BS EN 382-1 Fibreboards. Determination of surface absorption. Test method for dry process fibreboards

BS EN 622-3 Fibreboards. Specifications. Requirements for medium boards

BS EN 622-2 Fibreboards. Specifications. Requirements for hardboards

BS EN 622-1 Fibreboards. Specifications. General requirements

BS 1202-1 Specification for nails. Steel nails

BS EN 14015 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

BS 6100-6 Building and civil engineering. Vocabulary. Construction parts

BS 3056-7 Sizes of refractory bricks. Specification for basic bricks for steel making

BS 1945 Specification for fireguards for heating appliances (gas, electric and oil-burning)

BS EN ISO 6892-2 Metallic materials. Tensile testing. Method of test at elevated temperature

BS 6750 Specification for modular coordination in building

BS 5502-20 Buildings and structures for agriculture. Code of practice for general design considerations

BS 8219 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice

BS EN 1995-1-1 Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS 5427 Code of practice for the use of profiled sheet for roof and wall cladding on buildings

BS 5502-21 Buildings and structures for agriculture. Code of practice for selection and use of construction materials

BS 5534 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS 5918 Solar heating systems for domestic hot water. Code of practice for design and installation

BS 6100:Part 1:Section 1.3:Subsection 1.3.2 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Roofs and roofing

BS 6213:2000+A1 Selection of construction sealants. Guide

BS EN 12056-3 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 988 Zinc and zinc alloys. Specification for rolled flat products for building

BS 6577 Specification for mastic asphalt for building (natural rock asphalt aggregate)

BS 6915:2001+A1 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

CP 112:Part 3 Code of practice for the structural use of timber. Trussed rafters for roofs of dwellings

CP 143-12 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Copper. Metric units

BS 6915 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

BS 8218 Code of practice for mastic asphalt roofing

BS 8213-1 Windows doors and rooflights. Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice

BS EN 13964 Suspended ceilings. Requirements and test methods

PD 6477 Metric dimensions of steel tubes for hydraulic cylinders used in the construction of powered roof supports in the mining industry

ASTM E936-98 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)

ASTM D2829 – 07 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

ASTM E108 – 11 Standard Test Methods for Fire Tests of Roof Coverings

ASTM D228 / D228M – 15 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

ASTM D6622 – 01 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

ASTM C981 – 05 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

ASTM E1637 – 98 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

ASTM E1514 – 98 Standard Specification for Structural Standing Seam Steel Roof Panel Systems

ASTM D6630 – 08 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

ASTM D5635 / D5635M – 11 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

ASTM E1646 – 95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

ASTM D6380 / D6380M – 03 Standard Specification for Asphalt Roll Roofing (Organic Felt)

ASTM D5469 / D5469M – 12 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

ASTM D3617 / D3617M – 07 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

ASTM E2140 – 01 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

ASTM D6511 / D6511M – 06 Standard Test Methods for Solvent Bearing Bituminous Compounds

ASTM D4434 / D4434M – 15 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

ASTM D1970 / D1970M – 15a Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

ASTM C1225 – 08 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

ASTM E1680 – 16 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

ASTM D6757 / D6757M – 16 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

ASTM D6754 / D6754M – 15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

ASTM D6383 / D6383M – 99 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

ASTM D6221 / D6221M – 00 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

ASTM D6152 / D6152M – 12 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

ASTM D4932 / D4932M – 89 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

ASTM D4851 – 07 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

ASTM D4637 / D4637M – 15 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

ASTM D2626 / D2626M – 04 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

ASTM D1079 – 16 Standard Terminology Relating to Roofing and Waterproofing

ASTM C1492 – 03 Standard Specification for Concrete Roof Tile

ASTM D4830 / D4830M – 98 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

ASTM D4601 / D4601M – 04 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

ASTM C222 – 97 Standard Specification for Asbestos-Cement Roofing Shingles

ASTM D5683 / D5683M – 95 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

ASTM D5665 / D5665M – 99a Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

ASTM D4989 / D4989M – 90a Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

ASTM D4977 / D4977M – 03 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

ASTM D4897 / D4897M – 01 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

ASTM D4869 / D4869M – 16 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

ASTM D3909 / D3909M – 14 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

ASTM D3805 / D3805M – 97 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

ASTM D3746 / D3746M – 85 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

ASTM D1864 / D1864M – 89 Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

ASTM D1327 / D1327M – 04 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

ASTM D312 / D312M – 15 Standard Specification for Asphalt Used in Roofing

ASTM D226 / D226M – 09 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM D173 / D173M – 03 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

ASTM C1459 – 04 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

ASTM C1167 – 11 Standard Specification for Clay Roof Tiles

ASTM C726 – 12 Standard Specification for Mineral Wool Roof Insulation Board

ASTM D6382 / D6382M – 99 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

ASTM D6305 – 08 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

ASTM D5726 – 98 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

ASTM D5643 / D5643M – 06 Standard Specification for Coal Tar Roof Cement, Asbestos Free

ASTM D5636 / D5636M – 94 Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

ASTM D5602 / D5602M – 11 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

ASTM D4990 – 97a Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

ASTM D4074 / D4074M – 11 Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

ASTM D4073 – 06 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

ASTM D2178 / D2178M – 15a Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

ASTM D1865 / D1865M – 09 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

ASTM D227 / D227M – 03 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM C1491 – 14 Standard Specification for Concrete Roof Pavers

ASTM C1185 – 08 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

ASTM C1153 – 10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

ASTM F432 – 13 Standard Specification for Roof and Rock Bolts and Accessories

ASTM E661 – 03 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

ASTM E196 – 06 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

ASTM E72 – 15 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

ASTM D6298 – 13 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

ASTM D5405 / D5405M – 98 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

ASTM D5147 / D5147M – 14 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

ASTM D5100 / D5100M – 95a Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

ASTM D5076 / D5076M – 13 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

ASTM D4811 / D4811M – 06 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

ASTM D3019 – 08 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

ASTM D2164-83 Standard Methods of Testing Structural Insulating Roof Deck (Withdrawn 2005)

ASTM D1863 / D1863M – 05 Standard Specification for Mineral Aggregate Used on Built-Up Roofs

ASTM D1668 / D1668M – 97a Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

ASTM D449 / D449M – 03 Standard Specification for Asphalt Used in Dampproofing and Waterproofing

ASTM D146 / D146M – 04 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

ASTM C1530 / C1530M – 04 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

ASTM D6694 / D6694M -15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing SystemsRoofing

ASTM D3462 / D3462M – 10a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

ASTM C406 / C406M – 15 Standard Specification for Roofing Slate

ASTM F2021 – 11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

ASTM E695 – 03 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

ASTM D6705 / D6705M – 04 Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

ASTM D6509 / D6509M – 09 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

ASTM D6225 / D6225M – 98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing

ASTM D4586 / D4586M – 07 Standard Specification for Asphalt Roof Cement, Asbestos-Free

ASTM D2824 / D2824M – 13 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

ASTM D1227 – 13 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

ASTM D452 / D452M – 91 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

ASTM C1199 – 14 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

ASTM D6356 / D6356M – 98 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

ASTM D6294 / D6294M – 13 Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

ASTM E1592 – 05 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

ASTM D3468 / D3468M – 99 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

ASTM D3105 – 08 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

ASTM D2832 – 92 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

ASTM D2523 – 13 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

ASTM D451 / D451M – 91 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

ASTM D450/D450M-07 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

ASTM D43 / D43M – 00 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

ASTM D41 / D41M – 11 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

ASTM F1901 – 10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

ASTM E455 – 16 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

ASTM D6381 / D6381M – 15 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

ASTM D5081 / D5081M – 90 Standard Test Method for Aggregate Layer Hiding Power

ASTM D3409 / D3409M – 93 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces

ASTM C1340 / C1340M – 10 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

ASTM C728 – 16 Standard Specification for Perlite Thermal Insulation Board

ASTM C629 / C629M – 15 Standard Specification for Slate Dimension Stone

ASTM C208 – 12 Standard Specification for Cellulosic Fiber Insulating Board

ASTM C1302 – 04 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards

ASTM D5957 – 98 Standard Guide for Flood Testing Horizontal Waterproofing Installations

ASTM D4866 / D4866M – 88 Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

ASTM D4070-15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

ASTM D3745 / D3745M – 95 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

ASTM C956 – 04 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

ASTM B749 – 14 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

ASTM B370 – 12 Standard Specification for Copper Sheet and Strip for Building Construction

ASTM E2032 – 09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

ASTM E1803 – 14 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

ASTM D6455 – 11 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

ASTM D6136 / D6136M – 15 Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

ASTM D4799 / D4799M – 08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

ASTM D4798 / D4798M – 11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

ASTM D4435 – 13e1 Standard Test Method for Rock Bolt Anchor Pull Test

ASTM C1496 – 11 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

ASTM C1186 – 08 Standard Specification for Flat Fiber-Cement Sheets

ASTM C552 – 16 Standard Specification for Cellular Glass Thermal Insulation

ASTM C398 – 98 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

ASTM C318 / C318M – 13 Standard Specification for Gypsum Formboard

ASTM C140 / C140M – 15ae1 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

ASTM B882 – 10 Specification for Pre-Patinated Copper for Architectural Applications

ASTM B101 – 12 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

ASTM G84 – 89 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

ASTM E1930 / E1930M – 12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

ASTM E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters

ASTM E1677 – 11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

ASTM E1643 – 11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

ASTM E1425 – 14 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

ASTM E1399 / E1399M – 97 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

ASTM E970 – 14 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM E760 / E760M – 92 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

ASTM E575 – 05 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

ASTM E241 – 09 Standard Guide for Limiting Water-Induced Damage to Buildings

ASTM E119 – 16 Standard Test Methods for Fire Tests of Building Construction and Materials

ASTM E102 / E102M – 93 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

ASTM E90 – 09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

ASTM E73 – 13 Standard Practice for Static Load Testing of Truss Assemblies

ASTM D6769 / D6769M – 02 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

ASTM D6662 – 13 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D6451 / D6451M – 99 Standard Guide for Application of Asphalt Based Protection Board

ASTM D6153 – 15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

ASTM D6114 / D6114M – 09 Standard Specification for Asphalt-Rubber Binder

ASTM D5898 / D5898M – 96 Standard Guide for Standard Details for Adhered Sheet Waterproofing

ASTM D5869 – 07a Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

ASTM D5854 – 96 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

ASTM D5843 / D5843M – 95 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

ASTM D5516 – 09 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

ASTM D5385 / D5385M – 93 Standard Test Method for Hydrostatic Pressure Resistance of Water / AS 1478.2-2005 Chemical admixtures for concrete, mortar and grout – Methods of sampling and testing admixtures for concrete, mortar and groutproofing Membranes

ASTM D5385 / D5385M – 93 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes / ASTM D5295 / D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5192 – 09 Standard Practice for Collection of Coal Samples from Core

ASTM D4096 – 91 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

ASTM D3791 / D3791M – 11 Standard Practice for Evaluating the Effects of Heat on Asphalts

ASTM D3161 / D3161M – 16 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method))

ASTM D3141 / D3141M – 15 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

ASTM D2962 – 10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D2898 – 10 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

ASTM D2828-96 Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type (Withdrawn 2004)

ASTM D2643 / D2643M – 08 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)ASTM D2493 / D2493M – 09 Standard Viscosity-Temperature Chart for Asphalts

ASTM D2482-97 Standard Test Method for Surface Strength of Paper (Wax Pick Method) (Withdrawn 2010)

ASTM D1968 – 15 Standard Terminology Relating to Paper and Paper Products

ASTM D1856 – 09 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

ASTM C1485 – 13 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

ASTM C1483-04 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

ASTM C1289 – 16 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

ASTM C1288 – 14 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

ASTM C1262 – 10 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

ASTM C1242 – 15a Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

ASTM C1155 – 95 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

ASTM C1154 – 06 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

ASTM C1126 – 15 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

ASTM C1082 – 98 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

ASTM C1081 – 98 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

ASTM C1080 – 98 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

ASTM C1060 – 11a Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

ASTM C1046 – 95 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

ASTM C991 – 15 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

ASTM C717-14a Standard Terminology of Building Seals and Sealants

ASTM C636 / C636M – 13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

ASTM C551/C551M-07 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

ASTM C459 / C459M – 97 Standard Test Methods for Asbestos-Cement Flat Products

ASTM C317 / C317M – 00 Standard Specification for Gypsum Concrete

ASTM C240-08 Standard Test Methods of Testing Cellular Glass Insulation Block

ASTM C221 – 98 Standard Specification for Corrugated Asbestos-Cement Sheets

ASTM C120 / C120M – 15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate

ASTM C67 – 14 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

ASTM C56 – 13 Standard Specification for Structural Clay Nonloadbearing Tile

ASTM A755/A755M-15 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

ASTM D226/D226M-09 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM D227/D227M-03 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM F432 – 13 Standard Specification for Roof and Rock Bolts and Accessories

ASTM D4897 / D4897M – 01 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

ASTM D6380 / D6380M – 03 Standard Specification for Asphalt Roll Roofing (Organic Felt)

ASTM D450 / D450M – 07B Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

ASTM D6380 / D6380M – 03 Standard Specification for Asphalt Roll Roofing (Organic Felt)

ASTM D6380 / D6380M – 03b Standard Specification for Asphalt Roll Roofing (Organic Felt)

AS 1235 Road vehicles – Roof load carriers – Roof bars

AS 1562.1 Design and installation of sheet roof and wall cladding – Metal

AS/NZS 1562.2 Design and installation of sheet roof and wall cladding – Corrugated fibre-reinforced cement

AS 1562.3 Design and installation of sheet roof and wall cladding – Plastic

AS 2049 Roof tiles

AS 2050 Installation of roof tiles

AS 3730.19 Guide to the properties of paints for buildings – Solvent-borne – Roofing enamel

AS 4040.0 Methods of testing sheet roof and wall cladding – Introduction, list of methods and general requirements

AS 4040.1 Methods of testing sheet roof and wall cladding – Resistance to concentrated loads

AS 4040.2 Methods of testing sheet roof and wall cladding – Resistance to wind pressures for non-cyclone regions

AS 4040.3 Methods of testing sheet roof and wall cladding – Resistance to wind pressures for cyclone regions

AS 4040.4 Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) – Sheet roof materials

AS/NZS 4040.5 Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) for wall boards

AS 4046.0-2002 Methods of testing roof tiles – Introduction and list of methods

AS 4046.1 Methods of testing roof tiles – Determination of distortion

AS 4046.2 Methods of testing roof tiles – Determination of batten lugs and squareness

AS 4046.3 Methods of testing roof tiles – Determination of transverse strength

AS 4046.4 Methods of testing roof tiles – Determination of water absorption

AS 4046.5 Methods of testing roof tiles – Determination of permeability

AS 4046.6 Methods of testing roof tiles – Determination of resistance to freeze/thaw

AS 4256.1 Plastic roof and wall cladding materials – General requirements

AS 4256.2 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets

AS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)

AS 4256.4 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards

AS 4256.5 Plastic roof and wall cladding materials – Polycarbonate

AS/NZS 4257.0 Plastic roof and wall cladding materials – Methods of test – General introduction and list of methods

AS/NZS 4257.1 Plastic roof and wall cladding materials – Methods of test – Determination of dimensional properties

AS/NZS 4257.1 A1Plastic roof and wall cladding materials – Methods of test – Determination of dimensional properties: Amendment 1

AS/NZS 4257.10 Plastic roof and wall cladding materials – Methods of test – Determination of surface distortion (oil canning)

AS/NZS 4257.2 Plastic roof and wall cladding materials – Methods of test – Determination of dimensional stability at 60 degrees Celsius

AS/NZS 4257.3 Plastic roof and wall cladding materials – Methods of test – Determination of mass per unit area of sheet

AS/NZS 4257.4 Plastic roof and wall cladding materials – Methods of test – Determination of diffuse light transmission

AS/NZS 4257.5 Plastic roof and wall cladding materials – Methods of test – Determination of glass fibre content

AS/NZS 4257.6 Plastic roof and wall cladding materials – Methods of test – Determination of impact resistance

AS/NZS 4257.7 Plastic roof and wall cladding materials – Methods of test – Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure

AS/NZS 4257.8 Plastic roof and wall cladding materials – Methods of test – Determination of residual styrene

AS/NZS 4257.9 Plastic roof and wall cladding materials – Methods of test – Determination of transverse bending stiffness

AS 4597 Installation of roof slates and shingles (Non-interlocking type)

AS/NZS 60335.2.83 Household and similar electrical appliances – Safety – Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001, IDT)

AS 4654.1 Waterproofing membranes for external above-ground use – Materials / AS 4654.2-2012 Waterproofing membranes for external above-ground use – Design and installation

SA HB 39 Installation code for metal roof and wall cladding

HB 44 Supp 1 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 28 m/s sheet roof – Tie-down check sheet 1st edition

HB 44 Supp 2 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 28 m/s or 33 m/s tiled roof – Tie-down check sheet 1st edition

HB 44 Supp 3 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 33 m/s sheet or 41 m/s tiled roof material – Tie-down check sheet 1st edition

HB 44 Supp 4 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 41 m/s sheet roof – JD4 framing material – Tie-down check sheet 1st edition

DR 02001 Roof edge protection equipment

AS 2049 Roof tiles

AS 4046.7 Methods of testing roof tiles – Determination of resistance to salt attack

AS 4046.8 Methods of testing roof tiles – Adhesive mechanical fastener (flexible pointing)

AS 4046.9 Methods of testing roof tiles – Determination of dynamic weather resistance

SS 525 Code of practice for drainage of roofs

CP 82 Code of practice for waterproofing of reinforced concrete buildings

SS 70 Clay roofing tiles and fittings

SS 133 Bituminous emulsion for roof waterproofing

SS 370 Metal roofing

SS 374 Preformed waterproofing membranes for concealed roof

CP 89 Installation of clay roofing tiles

CP 94 Code of practice for installation of clay roofing tile

ISO/PAS 11154 Road vehicles — Roof load carriers

ISO 4355 Bases for design of structures — Determination of snow loads on roofs

ISO 5019-4 Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs

ISO 8108 Directives for fixing asbestos-cement corrugated and asymmetrical section sheets and fittings for roofing

ISO 8144-1 Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 1: Specification for applications with restricted ventilation

ISO 8144-2 Thermal insulation — Mineral wool mats for ventilated roof spaces –Part 2: Specification for horizontal applications with unrestricted ventilatio

ISO 8145 Thermal insulation — Mineral wool board for overdeck insulation of roofs — Specification

ISO 10904 Fibre-cement corrugated sheets and fittings for roofing and cladding