Case 1

Standards

Waterproofing

AS 3740 – Waterproofing of domestic wet areas

ASTM D5295 / D5295M – Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5957 – Standard Guide for Flood Testing Horizontal Waterproofing Installations

BS 6949: Specification for bitumen-based coatings for cold application excluding use in contact with potable water.

BS 8000-0: Workmanship on construction sites. Introduction and general principles.

CP 82: Code of practice for waterproofing of reinforced concrete buildings

Plumbing

AS/NZS 3500: Plumbing and drainage

• Part 0: Glossary of terms
• Part 2: Sanitary plumbing and drainage
• Part 2.1: Sanitary plumbing and drainage – Performance Requirement

AS 3558 Series: Methods of testing plastics and composite materials for use in sanitary plumbing fixtures

AS 3795: Copper alloy tubes for plumbing and drainage applications

ASTM A74: Standard Specification for Cast Iron Soil Pipe and Fittings

ASTM B698: Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

ASTM D618: Standard Practice for Conditioning Plastics for Testing

ASTM D1599: Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

ASTM D1600: Standard Terminology for Abbreviated Terms Relating to Plastics

ASTM D1784: Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

ASTM D1785: Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

ASTM D2122: Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

ASTM D2464: Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

ASTM D2749: Standard Symbols for Dimensions of Plastic Pipe Fittings

ASTM F412: Standard Terminology Relating to Plastic Piping Systems

ASTM F437: Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

BS EN 274: Waste fittings for sanitary appliances

• Part 1: Requirements
• Part 2: Test methods
• Part 3: Quality control

BS 3402: Specification for quality of vitreous china sanitary appliances

BS 6465: Sanitary installations

• Part 1: Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
• Part 3: Code of practice for the selection, installation and maintenance of sanitary and associated appliances

BS 8000-0: Workmanship on construction sites. Introduction and general principles

BS EN 12056-2: Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation.

ISO 265-1: Pipes and fittings of plastics materials – Fittings for domestic and industrial waste pipes – Basic dimensions: Metric series – Unplasticized poly(vinyl chloride) (PVC-U)

ISO 1452: Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U)

• Part 1: General
• Part 2: Pipes
• Part 3: Fittings
• Part 4: Valves
• Part 5: Fitness for purpose of the system

ISO 3114: Unplasticised polyvinyl chloride (PVC) pipes for potable water supply – extractability of lead and tin – test method first edition

ISO 3474: Unplasticized polyvinyl chloride (PVC) pipes – Specification and measurement of opacity

ISO 3603: Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints – Pressure test for leakproofness

ISO 3633: Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(vinyl chloride) (PVC-U)

ISO/TR 4191: Plastics piping systems for water supply – Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) – Guidance for installation

ISO 4439: Unplasticized polyvinyl chloride (PVC) pipes and fittings – Determination and specification of density

ISO 6412: Technical drawings – Simplified representation of pipelines

• Part 1: General rules and orthogonal representation
• Part 2: Isometric projection
• Part 3: Terminal features of ventilation and drainage systems

ISO 6594: Cast iron drainage pipes and fittings – Spigot series

ISO 6992: Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply – Extractability of cadmium and mercury occurring as impurities

ISO/TS 7024: Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings – Thermoplastics – Recommended practice for installation

ISO 8283: Plastics pipes and fittings – Dimensions of sockets and spigots for discharge systems inside buildings

• Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
• Part 2: Polyethylene (PE)
• Part 3: Polypropylene (PP)
• Part 4: Acrylonitrile/butadiene/styrene (ABS)

BS EN 12056-2: Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation

ISO 13844: Plastics piping systems – Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes – Test method for leak tightness under negative pressure, angular deflection and deformation

ISO 13845: Plastics piping systems – Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes – Test method for leak tightness under internal pressure and with angular deflection

SS 33: Cast iron spigot and socket soil, waste and ventilating pipes (sand cast and spun) and fitting

SS 174: Specification for joints and fittings for use with unplasticised PVC pressure pipes

SS 213: Unplasticised PVC pipes and fittings for soil, waste and vent applications