Case 1

Navigation

Standards

BS 476-3:2004 Fire tests on building materials and structures. Classification and method of test for external fire exposure to roofs

BS 648:1964 Schedule of weights of building materials (Withdrawn)

BS EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate

BS 690-6:1976 Asbestos-cement slates and sheets. Fittings for use with corrugated sheets (Witthdrawn)

BS EN 13707:2013 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS EN ISO 8990:1996 Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box

BS EN 13168:2012+A1:2015 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification

BS 1202-2:1974 Specification for nails. Copper nails

BS 1202-3:1974 Specification for nails. Aluminium nails

BS 1494-1:1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings (Withdrawn)

BS 1521:1972 Specification for waterproof building papers

BS 1521:1972 Specification for waterproof building papersBS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

BS 2830:1994 Specification for suspended access equipment (suspended chairs, traditional steeplejack’s seats, work cages, cradles and platforms) for use in the building, engineering construction, steeplejack and cleaning industries (Withdraw)

BS 4841-3:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes

BS 4868:1972 Specification for profiled aluminium sheet for building

Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS EN 1995-1-1:2004+A2:2014 Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS 5427:2016 Code of practice for the use of profiled sheet for roof and wall cladding on buildings

BS 5534:2014+A1:2015 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS EN 13162:2012+A1:2015 Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification

BS 5803-2:1985 Thermal insulation for use in pitched roof spaces in dwellings. Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing

BS 5803-3:1985 Thermal insulation for use in pitched roof spaces in dwellings. Specification for cellulose fibre thermal insulation for application by blowing

BS 5803-4:1985 Thermal insulation for use in pitched roof spaces in dwellings. Methods for determining flammability and resistance to smouldering

BS 5803-5:1985 Thermal insulation for use in pitched roof spaces in dwellings. Specification for installation of man-made mineral fibre and cellulose fibre insulation

BS 5918:2015 Solar heating systems for domestic hot water. Code of practice for design and installation

BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting

BS 5950-7:1992 Structural use of steelwork in building. Specification for materials and workmanship: cold formed sections (Withdrawn)

BS 6100-6:2008 Building and civil engineering. Vocabulary. Construction parts

BS 6100-11:2007 Building and civil engineering. Vocabulary. Performance characteristics, measurement and joints

BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice

BS EN 1991-1-3:2003+A1:2015 Eurocode 1. Actions on structures. General actions. Snow loads

BS 6915:2001+A1:2014 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)

BS 7021:1989 Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam

BS EN 14975:2006+A1:2010 Loft ladders. Requirements, marking and testing

BS 7916:1998 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes (WIthdrawn)

BS 8000-4:1989 Workmanship on building sites. Code of practice for waterproofing / BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

BS 8103-3:2009 Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing

BS 8200:1985 Code of practice for design of non-loadbearing external vertical enclosures of buildings (Withdrawn)

BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice

BS 8218:1998 Code of practice for mastic asphalt roofing

BS 8219:2001+A1:2013 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice

DD ISO/PAS 11154:2006 Road vehicles. Roof load carriers

CP 143-1:1958 Code of practice for sheet roof and wall coverings. Aluminium, corrugated and troughed

CP 143-5:1964 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Zinc

CP 143-10:1973 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units

CP 143-12:1970 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Copper. Metric units

CP 143-15:1973 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Aluminium. Metric units

CP 143-16:1974 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Semi-rigid asbestos bitumen sheet. Metric units

BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications

BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods

BS EN 492:2012 Fibre-cement slates and fittings. Product specification and test methods

BS EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings. Product specification and test methods

BS EN 495-5:2013 Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing

BS EN 501:1994 Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet

BS EN 502:2013 Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet

BS EN 504:2000 Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet

BS EN 505:2013 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet

BS EN 506:2008 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet

BS EN 507:2000 Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet

BS EN 508-1:2014 Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet. Steel

BS EN 508-2:2008 BS EN 508-2:2000 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Aluminium

BS EN 508-3:2008 Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Stainless steel

BS EN 516:2006 Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps

BS EN 517:2006 Prefabricated accessories for roofing. Roof safety hooks

BS EN 534:2006+A1:2010 Corrugated bitumen sheets. Product specification and test methods

BS EN 538:1994 Clay roofing tiles for discontinuous laying. Flexural strength test

BS EN 539-1:2005 Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test

BS EN 539-2:2013 Clay roofing tiles for discontinuous laying. Determination of physicalcharacteristics. Test for frost resistance

BS EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods

BS EN 595:1995 Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour

BS EN 988:1997 Zinc and zinc alloys. Specification for rolled flat products for building

BS EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods

BS EN 1024:2012 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics

BS EN 1107-1:2000 Flexible sheets for waterproofing. Determination of dimensional stability. Bitumen sheets for roof waterproofing

BS EN 1107-2:2001 Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing

BS EN 1108:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes

BS EN 1109:2013 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature

BS EN 1110:2010 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature

BS EN 1172:2011 Copper and copper alloys. Sheet and strip for building purposes

DD CEN/TS 1187:2012 Test methods for external fire exposure to roofs

BS EN 1296:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature

BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications

BS EN 1804-1:2001+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Support units and general requirements

BS EN 1804-2:2001+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Power set legs and rams

BS EN 1844:2013 Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing

BS EN 1847:2009 Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water

BS EN 1848-1:2000 Flexible sheets for waterproofing. Determination of length, width and straightness. Bitumen sheets for roof waterproofing

BS EN 1848-2:2001 Flexible sheets for waterproofing. Determination of length, width and straightness. Plastic and rubber sheets for roof waterproofing

BS EN 1849-1:2000 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing

BS EN 1849-2:2009 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets

BS EN 1850-1:2000 Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing

BS EN 1850-2:2001 Flexible sheets for waterproofing. Determination of visible defects. Plastic and rubber sheets for roof waterproofingBS EN 1928:2000 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness

BS EN 1928:2000 FLEXIBLE SHEETS FOR WATERPROOFING. BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING. DETERMINATION OF WATERTIGHTNESS

BS EN 1931:2000 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties

BS EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products. Technical delivery conditionsContinuously organic coated (coil coated) steel flat products. Technical delivery conditions

BS EN 12039:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules

BS EN 12056-3:2000 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 12310-1:2000 Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing

BS EN 12310-2:2000 Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Plastic and rubber sheets for roof waterproofing

BS EN 12311-1:2000 Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing

BS EN 12311-2:2013 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing

BS EN 12316-1:2000 Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing

BS EN 12316-2:2013 Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofingBS EN 12316-2:2013 Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing

BS EN 12317-1:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints

BS EN 12317-2:2010 Flexible sheets for waterproofing. Determination of shear resistance of joints. Plastic and rubber sheets for roof waterproofing

BS EN 12326-2:2011 Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate

BS EN 12467:2012 Fibre-cement flat sheets. Product specification and test methods

BS EN 12588:2006 Lead and lead alloys. Rolled lead sheet for building purposes

BS EN 12691:2006 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact

BS EN 12730:2015 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading

BS EN 12871:2013 Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls

BS EN 13111:2010 Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration

BS EN 13416:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling

BS EN 13583:2012 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance

91/13906 DC Thermoplastic roofing and sealing sheets. Determination of tear resistance. Trapezoidal test specimen method (prEN 495-2)

91/13907 DC Thermoplastic and elastomeric roofing and sealing sheets. Determination of split pressure resistance (prEN 495-3)

91/13908 DC Thermoplastic and elastomeric roofing and sealing sheets. Determination of water vapour transmission properties (prEN 495-4)

91/38881 DC Rubber, vulcanized. EPDM and blends of EPDM-butyl non-reinforced, non-backed roofing sheet. Specification (ISO/DIS 4634)

BS 4841-2:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications. Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings

BS EN 1297:2004 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water

96/104019 DC prEN 503. Roofing products from metal sheet. Specification for fully supported roofing products of lead sheet

97/103069 DC prEN 12871-1. Wood-based panels. Structural roof decking on joists. Part 1. Performance specifications

97/103070 DC Pren 12871-2 – Wood-based Panels – Structural Roof Decking On Joists – Part 2: Performance Requirements

NEN NPR CEN/TS 12872:2007 Wood-based Panels – Guidance On The Use Of Load-bearing Boards In Floors, Walls And Roofs

BS EN 12951:2004 Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods

97/704453 DC Road vehicles. Roof load carriers. Part 2. Accessories and their attachments to roof bars for special
purpose applications (ISO/DIS 11154-2)

97/704454 DC Road vehicles. Roof load carriers. Part 3. Specific purpose roof devices (ISO/DIS 11154-3)

BS EN 13141-5:2004 Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices

BS EN 13707:2013 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS EN 13579:2002 Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation

BS EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate

BS EN 13693:2004+A1:2009 Precast concrete products. Special roof elements

EN 12056-3:2000 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 1296:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature

BS EN 13859-1:2014 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing

BS EN 13956:2012 Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics

BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice

BS EN 13948:2007 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration

BS EN 14064-1:2010 Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation

BS EN 1804-3:2006+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Hydraulic control systems

BS EN ISO 12567-2:2005 Thermal performance of windows and doors. Determination of thermal transmittance by hot box method. Roof windows and other projecting windows

EN 14209:2005 Preformed Plasterboard Cornices – Definitions, Requirements And Test Methods

ISO/PAS 11154:2006 Road vehicles – Roof load carriers

BS EN 14437:2004 Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method

BS 5534:2014+A1:2015 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS EN 13501-5:2005+A1:2009 Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests

BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications

BS 416-1:1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems

BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods

BS 680-1:1944 Specification for roofing slates. Imperial units(Withdrawn)

BS EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings. Product specification and test methods

BS EN 492:2012 Fibre-cement slates and fittings. Product specification and test methods

BS 690-5:1975 Asbestos-cement slates and sheets. Lining sheets and panels

BS EN 13707:2013 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics

BS 849:1939 Code of practice for plain sheet zinc roofing (Withdrawn)

BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)

BS EN 316:2009 Wood fibre boards. Definition, classification and symbols / B S EN 321:2002 Wood-based panels. Determination of moisture resistance under cyclic test conditions / BS EN 322:1993 Wood-based panels. Determination of moisture content / BS EN 323:1993 Wood-based panels. Determination of density / BS EN 324-2:1993 Wood-based panels. Determination of dimensions of boards. Determination of squareness and edge straightness / BS EN 325:2012 Wood-based panels. Determination of dimensions of test pieces \ BS EN 382-1:1993 Fibreboards. Determination of surface absorption. Test method for dry process fibreboards / BS EN 622-3:2004 Fibreboards. Specifications. Requirements for medium boards / BS EN 622-2:2004 Fibreboards. Specifications. Requirements for hardboards / BS EN 622-1:2003 Fibreboards. Specifications. General requirements

BS 6577:1985 Specification for mastic asphalt for building (natural rock asphalt aggregate) (Withdrawn)

BS 1202-1:2002 Specification for nails. Steel nails

BS 1494-1:1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings (Withdrawn) (Withdrawn)

BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above

BS 6100-6:2008 Building and civil engineering. Vocabulary. Construction parts

BS 3056-7:1992 Sizes of refractory bricks. Specification for basic bricks for steel making

BS 1945:1971 Specification for fireguards for heating appliances (gas, electric and oil-burning)

BS EN ISO 6892-2:2011 Metallic materials. Tensile testing. Method of test at elevated temperature

BS 3792:1964 Recommendations for the installation of automatic liquid level and temperature measuring instruments on storage tanks (Withdrawn)

BS 4208:1967 Specification for carbon and low alloy steel containment structures for stationary nuclear power reactors

BS 6750:1986 Specification for modular coordination in building

BS 8219:2001+A1:2013 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice

BS EN 1995-1-1:2004+A2:2014 Eurocode 5: Design of timber structures. General. Common rules and rules for buildings

BS 5427:2016 Code of practice for the use of profiled sheet for roof and wall cladding on buildings

BS 5502-21:1990 Buildings and structures for agriculture. Code of practice for selection and use of construction materials

BS 5534:2014+A1:2015 Slating and tiling for pitched roofs and vertical cladding. Code of practice

BS 7916:1998 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes (WIthdrawn)

BS 7916:1998 Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes (WIthdrawn) (Withdrawn)
BS 5918:2015 Solar heating systems for domestic hot water. Code of practice for design and installation

BS 6100:Part 1:Section 1.3:Subsection 1.3.2:1985 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Roofs and roofing

BS 6213:2000+A1:2010 Selection of construction sealants. Guide

BS EN 12056-3:2000 Gravity drainage systems inside buildings. Roof drainage, layout and calculation

BS EN 988:1997 Zinc and zinc alloys. Specification for rolled flat products for building

BS 6577:1985 Specification for mastic asphalt for building (natural rock asphalt aggregate)

BS 6915:2001+A1:2014 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

CP 112:Part 3:1973 Code of practice for the structural use of timber. Trussed rafters for roofs of dwellings

CP 143-12:1970 Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Copper. Metric units

BS 6915:2001+A1:2014 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice

BS 8218:1998 Code of practice for mastic asphalt roofing

BS 8213-1:2004 Windows doors and rooflights. Design for safety in use and during cleaning of windows, including door-height windows and roof windows. Code of practice

BS EN 13964:2014 Suspended ceilings. Requirements and test methods

PD 6477:1976 Metric dimensions of steel tubes for hydraulic cylinders used in the construction of powered roof supports in the mining industry

ASTM E936-98(2004) Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)

ASTM D2829 – 07(2013) Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

ASTM E108 – 11 Standard Test Methods for Fire Tests of Roof Coverings

ASTM D6510 – 00 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems (Withdrawn 2015)

ASTM D228 / D228M – 15 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

ASTM D6622 – 01(2009) Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

ASTM C981 – 05(2013) Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

ASTM E1637 – 98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

ASTM E1514 – 98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems

ASTM D6630 – 08 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

ASTM D5635 / D5635M – 11 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

ASTM E1646 – 95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

ASTM D6380 / D6380M – 03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)

ASTM D5036-99(2005) Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012)

ASTM D5469 / D5469M – 12 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

ASTM D3617 / D3617M – 07(2015)e1 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

ASTM E2140 – 01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

ASTM D6511 / D6511M – 06(2011)e1 Standard Test Methods for Solvent Bearing Bituminous Compounds

ASTM D4434 / D4434M – 15 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

ASTM D1970 / D1970M – 15a Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

ASTM C1225 – 08(2012) Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

ASTM E1680 – 16 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

ASTM D6757 / D6757M – 16 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

ASTM D6754 / D6754M – 15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

ASTM D6383 / D6383M – 99(2015) Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

ASTM D6221 / D6221M – 00(2014)e1 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

ASTM D6152 / D6152M – 12 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

ASTM D4932 / D4932M – 89(2014)e1 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

ASTM D4851 – 07(2015) Standard Test Methods for Coated and Laminated Fabrics for Architectural Use

ASTM D4637 / D4637M – 15 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

ASTM D2626 / D2626M – 04(2012)e1 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

ASTM D1079 – 16 Standard Terminology Relating to Roofing and Waterproofing

ASTM C1492 – 03(2009) Standard Specification for Concrete Roof Tile

ASTM E907-96(2004) Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)

ASTM D5019-07a Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane (Withdrawn 2011)

ASTM D4830 / D4830M – 98(2014)e1 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

ASTM D4601 / D4601M – 04(2012)e1 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
ASTM C222 – 97(2014) Standard Specification for Asbestos-Cement Roofing Shingles

ASTM D5683 / D5683M – 95(2011)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

ASTM D5665 / D5665M – 99a(2014)e1 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

ASTM D5082-99(2005) Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012)

ASTM D4989 / D4989M – 90a(2014)e1 Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

ASTM D4977 / D4977M – 03(2013)e1 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

ASTM D4897 / D4897M – 01(2009) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

ASTM D4869 / D4869M – 16 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

ASTM D3909 / D3909M – 14 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

ASTM D3805 / D3805M – 97(2009) Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

ASTM D3747-79(2007) Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation (Withdrawn 2016)

ASTM D3746 / D3746M – 85(2015)e1 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

ASTM D1864 / D1864M – 89(2009)e1 Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

ASTM D1327 / D1327M – 04(2012)e1 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

ASTM D312 / D312M – 15 Standard Specification for Asphalt Used in Roofing

ASTM D226 / D226M – 09 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM D173 / D173M – 03(2011)e1 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

ASTM C1459 – 04(2014) Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

ASTM C1167 – 11 Standard Specification for Clay Roof Tiles

ASTM C726 – 12 Standard Specification for Mineral Wool Roof Insulation Board

ASTM D6382 / D6382M – 99(2011)e1 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

ASTM D6305 – 08(2015)e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

ASTM D5726 – 98(2013) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

ASTM D5643 / D5643M – 06(2012)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Free

ASTM D5636 / D5636M – 94(2011)e1 Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
ASTM D5602 / D5602M – 11 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

ASTM D4990 – 97a(2013) Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

ASTM D4074 / D4074M – 11(2015) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

ASTM D4073 – 06(2013) Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

ASTM D4022/D4022M-07(2012)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Containing (Withdrawn 2014)

ASTM D2823/D2823M-05(2011)e1 Standard Specification for Asphalt Roof Coatings, Asbestos Containing (Withdrawn 2014)

ASTM D2822/D2822M-05(2011)e1 Standard Specification for Asphalt Roof Cement, Asbestos Containing (Withdrawn 2016)

ASTM D2178 / D2178M – 15a Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

ASTM D1865 / D1865M – 09 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

ASTM D227 / D227M – 03(2011)e1 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM C1491 – 14 Standard Specification for Concrete Roof Pavers

ASTM C1185 – 08(2012) Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

ASTM C1153 – 10(2015) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

ASTM F432 – 13 Standard Specification for Roof and Rock Bolts and Accessories

ASTM E661 – 03(2015)e1 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

ASTM E196 – 06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

ASTM E72 – 15 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes (Withdrawn 2015)

ASTM D6298 – 13 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

ASTM D5405 / D5405M – 98(2015) Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

ASTM D5147 / D5147M – 14 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

ASTM D5100 / D5100M – 95a(2010)e1 Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

ASTM D5076 / D5076M – 13 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

ASTM D4811 / D4811M – 06(2013)e1 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

ASTM D3019 – 08 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

ASTM D2164-83(2000) Standard Methods of Testing Structural Insulating Roof Deck (Withdrawn 2005)

ASTM D1863 / D1863M – 05(2011)e1 Standard Specification for Mineral Aggregate Used on Built-Up Roofs

ASTM D1668 / D1668M – 97a(2014)e1 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

ASTM D449 / D449M – 03(2014)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing

ASTM D225-07 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules (Withdrawn 2012)

ASTM D146 / D146M – 04(2012)e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

ASTM C1530 / C1530M – 04(2014) Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

ASTM D6694 / D6694M – 15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing SystemsRoofing

ASTM D6083-05e1 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014)

ASTM D3462 / D3462M – 10a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

ASTM C406 / C406M – 15 Standard Specification for Roofing Slate

ASTM F2021 – 11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

ASTM E695 – 03(2015)e1 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

ASTM D6705 / D6705M – 04(2011)e1 Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

ASTM D6509 / D6509M – 09(2015) Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

ASTM D6225 / D6225M – 98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing

ASTM D4586 / D4586M – 07(2012)e1 Standard Specification for Asphalt Roof Cement, Asbestos-Free

ASTM D2824 / D2824M – 13 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

ASTM D1227 – 13 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

ASTM D452 / D452M – 91(2013)e1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

ASTM C1199 – 14 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

ASTM D6356 / D6356M – 98(2011)e1 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

ASTM D6294 / D6294M – 13 Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

ASTM E1592 – 05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure DifferenceASTM E1592 – 05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

ASTM D3468 / D3468M – 99(2013)e1 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

ASTM D3105 – 08 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

ASTM D2832 – 92(2016) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

ASTM D2523 – 13 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

ASTM D451 / D451M – 91(2013)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

ASTM D450/D450M-07(2013)e1 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

ASTM D43 / D43M – 00(2012)e1 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

ASTM D41 / D41M – 11 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

ASTM R0009 -Abbreviated Metric Practice Guide for the Roofing Industry (This is not an ASTM standard))

ASTM F1901 – 10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

ASTM E455 – 16 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

ASTM D6381 / D6381M – 15 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

ASTM D5081 / D5081M – 90(2011)e1 Standard Test Method for Aggregate Layer Hiding Power

ASTM D3409 / D3409M – 93(2016)e1 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces

ASTM D727-96(2006) Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method (Withdrawn 2011)Method

ASTM C1340 / C1340M – 10(2015) Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

ASTM C728 – 16 Standard Specification for Perlite Thermal Insulation Board

ASTM C629 / C629M – 15 Standard Specification for Slate Dimension Stone

ASTM C208 – 12 Standard Specification for Cellulosic Fiber Insulating Board

ASTM C1302 – 04(2011) Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards

ASTM D5957 – 98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations

ASTM D4866 / D4866M – 88(2011)e1 Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

ASTM D4070-15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

ASTM D3745 / D3745M – 95(2015)e1 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

ASTM C956 – 04(2015) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

ASTM C43-08 Standard Terminology of Structural Clay Products (Withdrawn 2009)

ASTM B749 – 14 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

ASTM B370 – 12 Standard Specification for Copper Sheet and Strip for Building Construction

ASTM E2032 – 09(2013) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

ASTM E1803 – 14 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

ASTM D6455 – 11 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

ASTM D6136 / D6136M – 15 Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

ASTM D4799 / D4799M – 08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

ASTM D4798 / D4798M – 11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

ASTM D4435 – 13e1 Standard Test Method for Rock Bolt Anchor Pull Test

ASTM D2939-03 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)

ASTM D529-04 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013)

ASTM C1496 – 11 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

ASTM C1186 – 08(2012) Standard Specification for Flat Fiber-Cement Sheets

ASTM C552 – 16 Standard Specification for Cellular Glass Thermal Insulation

ASTM C398 – 98(2012) Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

ASTM C318 / C318M – 13 Standard Specification for Gypsum Formboard

ASTM C140 / C140M – 15ae1 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

ASTM B882 – 10 Specification for Pre-Patinated Copper for Architectural Applications

ASTM B101 – 12 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

ASTM G84 – 89(2012) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

ASTM F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications (Withdrawn 2014)

ASTM E1930 / E1930M – 12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

ASTM E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters

ASTM E1677 – 11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

ASTM E1643 – 11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

ASTM E1425 – 14 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

ASTM E1399 / E1399M – 97(2013)e1 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

ASTM E970 – 14 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

ASTM E760 / E760M – 92(2015)e1 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

ASTM E575 – 05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

ASTM E241 – 09(2014)e1 Standard Guide for Limiting Water-Induced Damage to Buildings

ASTM E119 – 16 Standard Test Methods for Fire Tests of Building Construction and Materials

ASTM E102 / E102M – 93(2009) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures

ASTM E90 – 09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

ASTM E73 – 13 Standard Practice for Static Load Testing of Truss Assemblies

ASTM D6769 / D6769M – 02(2010)e1 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

ASTM D6662 – 13 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D6451 / D6451M – 99(2014)e1 Standard Guide for Application of Asphalt Based Protection Board

ASTM D6153 – 15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

ASTM D6135-05 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing (Withdrawn 2014)

ASTM D6114 / D6114M – 09 Standard Specification for Asphalt-Rubber Binder

ASTM D5898 / D5898M – 96(2013) Standard Guide for Standard Details for Adhered Sheet Waterproofing

ASTM D5869 – 07a(2013) Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

ASTM D5854 – 96(2015) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

ASTM D5843 / D5843M – 95(2014)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

ASTM D5516 – 09 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

ASTM D5385 / D5385M – 93(2014)e1 Standard Test Method for Hydrostatic Pressure Resistance of Water / AS 1478.2-2005 Chemical admixtures for concrete, mortar and grout – Methods of sampling and testing admixtures for concrete, mortar and groutproofing Membranes

ASTM D5385 / D5385M – 93(2014)e1 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes / ASTM D5295 / D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5192 – 09(2015) Standard Practice for Collection of Coal Samples from Core

ASTM D4096 – 91(2009) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

ASTM D3791 / D3791M – 11 Standard Practice for Evaluating the Effects of Heat on Asphalts

ASTM D3161 / D3161M – 16 Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method))

ASTM D3141 / D3141M – 15 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

ASTM D2962 – 10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D2898 – 10 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

ASTM D2828-96(2003)Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type (Withdrawn 2004)

ASTM D2643 / D2643M – 08(2013)e1 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)ASTM D2493 / D2493M – 09 Standard Viscosity-Temperature Chart for Asphalts

ASTM D2482-97(2007) Standard Test Method for Surface Strength of Paper (Wax Pick Method) (Withdrawn 2010)

ASTM D1968 – 15 Standard Terminology Relating to Paper and Paper Products

ASTM D1856 – 09(2015) Standard Test Method for Recovery of Asphalt From Solution by Abson Method

ASTM C1485 – 13 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
ASTM C1483-04 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

ASTM C1452-00(2006) Standard Specification for Reinforced Autoclaved Aerated Concrete Elements (Withdrawn 2013)

ASTM C1289 – 16 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

ASTM C1288 – 14 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

ASTM C1262 – 10 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

ASTM C1242 – 15a Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

ASTM C1155 – 95(2013) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

ASTM C1154 – 06(2011) Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

ASTM C1126 – 15 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

ASTM C1082 – 98(2014) Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

ASTM C1081 – 98(2014) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

ASTM C1080 – 98(2014) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

ASTM C1060 – 11a(2015) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

ASTM C1046 – 95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

ASTM C991 – 15 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings

ASTM C717-14a Standard Terminology of Building Seals and Sealants

ASTM C636 / C636M – 13 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

ASTM C551/C551M-07(2011)e1 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

ASTM C459 / C459M – 97(2011)e1 Standard Test Methods for Asbestos-Cement Flat Products

ASTM C317 / C317M – 00(2015) Standard Specification for Gypsum Concrete

ASTM C240-08(2012) Standard Test Methods of Testing Cellular Glass Insulation Block

ASTM C221 – 98(2014) Standard Specification for Corrugated Asbestos-Cement Sheets

ASTM C120 / C120M – 15a Standard Test Methods for Flexure Testing of Structural and Roofing Slate

ASTM C67 – 14 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

ASTM C56 – 13 Standard Specification for Structural Clay Nonloadbearing Tile

ASTM A755/A755M-15 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

ASTM D226/D226M-09 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing / ASTM D227/D227M-03(2011)e1 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

ASTM F432 – 13 Standard Specification for Roof and Rock Bolts and Accessories

ASTM D4897 / D4897M – 01(2009) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

D3378 Specification for Asphalt-Saturated and Coated Asbestos Felt Base Sheet Used in ROOFing (Discontinued 1985), Replaced By No_Replacement

D3158 Specification for Asphalt Saturated and Coated Organic Felt Used in ROOFing (Discontinued 1983), Replaced By No_Replacement

D1866 Test Method for Translucency of Mineral Aggregate Used on Built-Up ROOFs (Discontinued 1989), Replaced By No_Replacement

ASTM D2939-03 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)

D1001 Specification for Sieve Analysis of Granular Mineral Surfacing for Asphalt ROOFing and Shingles (Discontinued 1960), Replaced By No_Replacement

D655 Specification for Asphalt-Saturated and Coated Asbestos Felts for Use in Constructing Built-Up ROOFs (Discontinued 1970), Replaced By No_Replacement

D654 Specification for Coal-Tar Pitch for Steep Built-Up ROOFs (Discontinued 1957), Replaced By No_Replacement

ASTM D6380 / D6380M – 03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)

D272 Methods of Analysis of ROOFing Felt for Fiber Composition (Discontinued 1940), Replaced By No_Replacement

ASTM D450 / D450M – 07(2013)e1 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

D250 Specification for Asphalt-Saturated Asbestos Felt Used in ROOFing and Waterproofing (Discontinued 1991), Replaced By No_Replacement

ASTM D6380 / D6380M – 03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)

D248 Specification for Asphalt ROOFing Surfaced with Fine Mineral Granules (Discontinued 1942), Replaced By No_Replacement

ASTM D6380 / D6380M – 03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)

C1050 Standard Specification for Rigid Cellular Polystyrene-Cellulosic Fiber Composite ROOF Insulation (Discontinued 1999), Replaced By No_Replacement

C1013 Specification for Faced Rigid Cellular Polyisocyanurate ROOF Insulation (Discontinued 1997), Replaced By No_Replacement

C984 Specification for Perlite Board and Rigid Cellular Polyisocyanurate Composite ROOF Insulation (Discontinued 1997), Replaced By No_Replacement

C855 Thermal Resistance Factors for Preformed Above-Deck ROOF Insulation (Discontinued 1983), Replaced By No_Replacement

C707 Specification for Gypsum Board Substrate for Floor or ROOF Assemblies (Discontinued 1981), Replaced By No_Replacement

ASTM A361/A361M-94 Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding (Withdrawn 01 Jul 1996)

AS 1235-2000 Road vehicles – Roof load carriers – Roof bars

AS 1562.1-1992 Design and installation of sheet roof and wall cladding – Metal

AS 1562.1-1992/Amdt 1-1993 Design and installation of sheet roof and wall cladding – Metal

AS 1562.1-1992/Amdt 2-1995 Design and installation of sheet roof and wall cladding – Metal

AS/NZS 1562.2:1999 Design and installation of sheet roof and wall cladding – Corrugated fibre-reinforced cement

AS 1562.3-2006 Design and installation of sheet roof and wall cladding – Plastic

AS 2049-2002 (R2015) Roof tiles

AS 2050-2002 Installation of roof tiles

AS 2050-2002/Amdt 1-2005 Installation of roof tiles

AS 2050-2002/Amdt 2-2012 Installation of roof tiles

AS 2627.1-1993 Thermal insulation of dwellings – Thermal insulation of roof/ceilings and walls in dwellings (Withdrawn 13 Jan 2007)

AS 2627.1-1993/Amdt 1-1995 Thermal insulation of dwellings – Thermal insulation of roof/ceilings and walls in dwellings (Withdrawn 13 Jan 2007)

AS 3730.19-1993 Guide to the properties of paints for buildings – Solvent-borne – Roofing enamel

AS 3730.20-1993 Guide to the properties of paints for buildings – Latex – Roofing paint (Withdrawn 27 Nov 2003)

AS 4040.0-1992 Methods of testing sheet roof and wall cladding – Introduction, list of methods and general requirements
AS 4040.1-1992 Methods of testing sheet roof and wall cladding – Resistance to concentrated loads

AS 4040.2-1992 Methods of testing sheet roof and wall cladding – Resistance to wind pressures for non-cyclone regions

AS 4040.3-1992 Methods of testing sheet roof and wall cladding – Resistance to wind pressures for cyclone regions

AS 4040.4-2006 Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) – Sheet roof materials

AS/NZS 4040.5:1996 Methods of testing sheet roof and wall cladding – Resistance to impact (sandbag) for wall boards

AS 4046.0-2002 Methods of testing roof tiles – Introduction and list of methods

AS 4046.1-2002 (R2015) Methods of testing roof tiles – Determination of distortion

AS 4046.2-2002 Methods of testing roof tiles – Determination of batten lugs and squareness

AS 4046.3-2002 (R2015) Methods of testing roof tiles – Determination of transverse strength

AS 4046.4-2002 (R2015) Methods of testing roof tiles – Determination of water absorption

AS 4046.5-2002 (R2015) Methods of testing roof tiles – Determination of permeability

AS 4046.6-1992 Methods of testing roof tiles – Determination of resistance to freeze/thaw

AS 4256.1-2006 Plastic roof and wall cladding materials – General requirements

AS 4256.2-2006 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets

AS 4256.3-2006 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)

AS 4256.4-2006 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards

AS 4256.5-2006 Plastic roof and wall cladding materials – Polycarbonate

AS/NZS 4257.0:1994 Plastic roof and wall cladding materials – Methods of test – General introduction and list of methods

AS/NZS 4257.1:1994 Plastic roof and wall cladding materials – Methods of test – Determination of dimensional properties

AS/NZS 4257.1:1994 A1Plastic roof and wall cladding materials – Methods of test – Determination of dimensional properties: Amendment 1

AS/NZS 4257.10:1997 Plastic roof and wall cladding materials – Methods of test – Determination of surface distortion (oil canning)

AS/NZS 4257.2:1994 Plastic roof and wall cladding materials – Methods of test – Determination of dimensional stability at 60 degrees Celsius

AS/NZS 4257.3:1994 Plastic roof and wall cladding materials – Methods of test – Determination of mass per unit area of sheet

AS/NZS 4257.4:1994 Plastic roof and wall cladding materials – Methods of test – Determination of diffuse light transmission

AS/NZS 4257.5:1994 Plastic roof and wall cladding materials – Methods of test – Determination of glass fibre content

AS/NZS 4257.6:1994 Plastic roof and wall cladding materials – Methods of test – Determination of impact resistance

AS/NZS 4257.6:1994/Amdt 1:1995 Plastic roof and wall cladding materials – Methods of test – Determination of impact resistance

AS/NZS 4257.7:1994 Plastic roof and wall cladding materials – Methods of test – Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure

AS/NZS 4257.8:1994 Plastic roof and wall cladding materials – Methods of test – Determination of residual styrene

AS/NZS 4257.9:1995 Plastic roof and wall cladding materials – Methods of test – Determination of transverse bending stiffness

AS 4597-1999 (R2015) Installation of roof slates and shingles (Non-interlocking type)

AS/NZS 60335.2.83:2002 Household and similar electrical appliances – Safety – Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001, IDT)

AS A99-1959 Bituminous felt roofing. Type 1(c) coated organic fibre felt roofing (Withdrawn 26 Nov 2003)

AS 4654.1-2012 Waterproofing membranes for external above-ground use – Materials / AS 4654.2-2012 Waterproofing membranes for external above-ground use – Design and installation

SA HB 39:2015 Installation code for metal roof and wall cladding

HB 39 Supp 1-1997 (CD-ROM) Installation code for metal roof and wall cladding – Multimedia guide on CD-ROM (Supplement to SAA HB39-1997) (Withdrawn 15 Apr 2004)

HB 44 Supp 1-1995 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 28 m/s sheet roof – Tie-down check sheet 1st edition

HB 44 Supp 2-1995 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 28 m/s or 33 m/s tiled roof – Tie-down check sheet 1st edition

HB 44 Supp 3-1995 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 33 m/s sheet or 41 m/s tiled roof material – Tie-down check sheet 1st edition

HB 44 Supp 4-1995 A Guide to the Timber Framing Code – Standard fixing and tie-down requirements 41 m/s sheet roof – JD4 framing material – Tie-down check sheet 1st edition

DR 02001-02002 Roof edge protection equipment

AS 2049-2002 (R2015) Roof tiles / AS 2050-2002 InstALLATION OF ROOF TILES / AS 4046.0-2002 METHODS OF TESTING ROOF TILES – INTRODUCTION AND LIST OF METHODS / AS 4046.1-2002 (R2015) METH015) METHODS OF TESTING ROOF TILES – DETERMINATION OF DISTORTION / AS 4046.2-2002 OF TILES – DETERMINATION OF BATTEN LUGS AND SQUARENESS / AS 4046.3-2002 (R2015 METHODS OF TESTING ROOF TILES – DETERMINATION OF TRANSVERSE STRENGTH / AS 4046.4-2002 (R2015) METHODS OF TESTING ROOF TILES – DETERMINATION OF WATER ABSORPTION / AS 4046.5-2002 (R22 (R2015) METHODS OF TESTING ROOF TILES – DETERMINATION OF PERMEABILITY / AS 4046.6-2002 (R20115) METHODS OF TESTING ROOF TILES – DETERMINATION OF RESISTANCE TO FREEZE/THAW / AS 4046.7-2002 (R215) Methods of testing roof tiles – Determination of resistance to salt attack / AS 4046.8-2002 Methods of testing roof tiles – Adhesive mechanical fastener (flexible pointing) / AS 4046.9-2002 (R2015) Methods of testing roof tiles – Determination of dynamic weather resistance

SS 525 : 2006 Code of practice for drainage of roofs

CP 43 : 1988 Code of practice for the installation of concrete interlocking roofing tiles (Withdrawn – 07 Jul 2011)

CP 82 : 1999 Code of practice for waterproofing of reinforced concrete buildings

SS 70 : 2001Clay roofing tiles and fittings

SS 133 : 1987 Bituminous emulsion for roof waterproofing

SS 310 : 1986 Concrete interlocking roofing tiles (Withdrawn – 07 Jul 2011)

SS 370 : 1994 Metal roofing

SS 374 : 1994 Preformed waterproofing membranes for concealed roof

CP 89 : 2001-Installation of clay roofing tiles

CP 94 : 2002 Code of practice for installation of clay roofing tile[/su_tab]

[su_tab title=”ISO”]ISO/PAS 11154:2006 Road vehicles — Roof load carriers

ISO 393-1:1983 Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding (Withdrawn

ISO 393-2:1986 Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding (Withdrawn)

ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and ISO 393-4:1986 Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding (Withdrawn) fittings for roofing (Withdrawn)

ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and fittings for roofing (Withdrawn)

ISO 4355:2013 Bases for design of structures — Determination of snow loads on roofs

ISO 5019-4:1988 Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs

ISO 8108:1986 Directives for fixing asbestos-cement corrugated and asymmetrical section sheets and fittings for roofing

ISO 8144-1:1995 Thermal insulation — Mineral wool mats for ventilated roof spaces — Part 1: Specification for applications with restricted ventilation

ISO 8144-2:1995 Thermal insulation — Mineral wool mats for ventilated roof spaces –Part 2: Specification for horizontal applications with unrestricted ventilatio

ISO 8145:1994 Thermal insulation — Mineral wool board for overdeck insulation of roofs — Specification

ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding

ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding;