Case 1

Standards

PAINTS

BS EN ISO 4618 Paints and varnishes.

BS EN ISO 11998 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 3900-F2 Methods of test for paint. Durability tests on paint films. Determination of resistance to humidity (cyclic condensation)

BS 3900-F6 Methods of test for paint. Durability tests on paint films. Notes for guidance on the conduct of natural weathering test

BS EN ISO 6270-1, BS 3900-F9 Paints and varnishes. Determination of resistance to humidity. Continuous condensation

BS EN ISO 11998 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 6150+A1 Painting of buildings. Code of practice

BS 7664 Specification for undercoat and finishing paints

ASTM D1640 / D1640M – 14 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings

ASTM D2574 – 06 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

ASTM D279 – 02 Standard Test Methods for Bleeding of Pigments

ASTM D4258 – 05 Standard Practice for Surface Cleaning Concrete for Coating

ASTM D5098 – 16 Standard Specification for Artists’ Acrylic Dispersion Paints

ASTM D5146 – 10 Standard Guide to Testing Solvent-Borne Architectural Coatings

ASTM D5324 – 10 Standard Guide for Testing Water-Borne Architectural Coatings

ASTM D6237 – 09 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

AS/NZS 2310 Glossary of paint and painting terms

AS/NZS 2311 Guide to the painting of buildings

AS 3730.0 Guide to the properties of paints for buildings – General information on the specification, purchasing and testing of paints

AS 3730.100 Guide to the properties of paints for buildings – Introduction and list of guides

HB 73.1 Handbook of Australian Paint Standards – General

HB 73.2 Handbook of Australian Paint Standards – Test methods

AS 1580.408.5 Paints and related materials – Methods of test – Adhesion – Pull-off test

AS/NZS 1580.481.1.9 Paints and related materials – Methods of test – Coatings – Exposed to weathering – Degree of blistering

SS 5 Series – Methods of test for paints, varnishes and related materials

SS 7 Paint – Finishing, gloss enamel

SS 542 Code of practice for painting of buildings

SS 34 Undercoat paint for gloss enamel

SS 150 Emulsion paints for decorative purposes

ISO 1513 Paints and varnishes — Examination and preparation of test samples

ISO 1514 Paints and varnishes — Standard panels for testing

ISO 1516 Determination of flash/no flash — Closed cup equilibrium method

ISO 9117-3 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini

ISO 1518-1 Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

ISO 1520 Paints and varnishes — Cupping test

ISO 1522 Paints and varnishes — Pendulum damping test

ISO 1523 Determination of flash point — Closed cup equilibrium method

ISO 1524 Paints, varnishes and printing inks — Determination of fineness of grind

ISO 2431 Paints and varnishes — Determination of flow time by use of flow cups

ISO 2808 Paints and varnishes — Determination of film thickness

ISO 2810 Paints and varnishes — Natural weathering of coatings — Exposure and assessment

ISO 2811-2 Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method

ISO 2811-3 Paints and varnishes — Determination of density — Part 3: Oscillation method

ISO 2811-4 Paints and varnishes — Determination of density — Part 4: Pressure cup method

ISO 2812-1:2 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water

ISO 2812-2 Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

ISO 2813 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

ISO 2815 Paints and varnishes — Buchholz indentation test

ISO 2884-1 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear

ISO 3233-1 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

ISO 4624 Paints and varnishes — Pull-off test for adhesion

ISO 4628-1:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

ISO 4628-3 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

ISO 4628-4 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

ISO 4628-5 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

ISO 4628-6 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

ISO 6504-3 Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

ISO 6860 Paints and varnishes — Bend test (conical mandrel)

ISO 7142 Binders for paints and varnishes — Epoxy resins — General methods of test

ISO 7143 Binders for paints and varnishes — Methods of test for characterizing water-based binders

ISO 7783 Paints and varnishes — Determination of water-vapour transmission properties — Cup method

ISO 7784-1 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen

ISO 7784-2 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

ISO 7784-3 Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

ISO 8501-1 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall

ISO 9514 Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing

ISO 16474-1 Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance

ISO 11890-1 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method

ISO 11890-2 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method

ISO 11909 Binders for paints and varnishes — Polyisocyanate resins — General methods of test

ISO 11997-1 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

ISO 11997-2 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 11998 Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

ISO 12137 Paints and varnishes — Determination of mar resistance

ISO 1518-2 Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method

ISO 14680-1 Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method

ISO 14680-2 Paints and varnishes — Determination of pigment content — Part 2: Ashing method / ISO 15184 Paints and varnishes — Determination of film hardness by pencil test