Case 2

Standards

Concrete

BS EN 197-1 Cement. Composition, specifications and conformity criteria for common cements

BS ISO 3310-2 Test sieves. Technical requirements and testing. Test sieves of perforated metal plate/ BS 410-1, ISO 3310-1 Test sieves. Technical requirements and testing. Test sieves of metal wire cloth

BS EN 12620 Aggregates for concrete

BS EN 12878 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test

BS 4550-6 Methods of testing cement. Standard sand for mortar cubes

BS EN 1015-7 Methods of test for mortar for masonry. Determination of air content of fresh mortar / BS EN 1015-4 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration) / BS EN 1015-19 Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars / BS EN 1015-1 Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis) / BS EN 1015-2 Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars / BS EN 1015-3 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table) / BS EN 1015-6 Methods of test for mortar for masonry. Determination of bulk density of fresh mortar / BS EN 1015-9 Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar / BS EN 1015-10 Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar / BS 4551 Mortar. Methods of test for mortar and screed. Chemical analysis and physical testing / BS EN 998-1-Specification for mortar for masonry. Rendering and plastering mortar/ BS EN 998-2-Specification for mortar for masonry. Masonry mortar

BS EN 934-3 Admixtures for concrete, mortar and grout. Admixtures for masonry mortar. Definitions, requirements, conformity and marking and labelling/ BS EN 480-4 Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete/ BS EN 934-6 Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity/BS EN 480-11 Admixtures for concrete, mortar and grout. Test methods. Determination of air void characteristics in hardened concrete/BS EN 480-12 Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures/BS EN 480-1 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing/BS EN 934-2 Admixtures for concrete, mortar and grout . Concrete admixtures. Definitions, requirements, conformity, marking and labelling/BS EN 480-8 Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content/BS EN 480-10 Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content/BS EN 480-6:2005 Admixtures for concrete, mortar and grout. Test methods. Infrared analysis/BS EN 480-5:2005 Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption/BS EN 480-2:2006 Admixtures for concrete, mortar and grout. Test methods. Determination of setting time

BS EN 998-2 Specification for mortar for masonry. Masonry mortar/ BS EN 998-1 Specification for mortar for masonry. Rendering and plastering mortar

BS 6319-3 Testing of resin and polymer/cement compositions for use in construction. Methods for measurement of modulus of elasticity in flexure and flexural strength

BS 6319-12 Testing of resin and polymer/cement compositions for use in construction. Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion

PD 6678 Guide to the specification of masonry mortar

BS EN 480-1 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing

BS EN 480-2 Admixtures for concrete, mortar and grout. Test methods. Determination of setting time

BS EN 480-4 Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete

BS EN 480-5 Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption

BS EN 480-6 Admixtures for concrete, mortar and grout. Test methods. Infrared analysis

BS EN 480-8 Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content

BS EN 480-10 Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content

BS EN 480-11 Admixtures for concrete, mortar and grout. Test methods. Determination of air void characteristics in hardened concrete

BS EN 480-12 Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures

BS EN 934-2 Admixtures for concrete, mortar and grout . Concrete admixtures. Definitions, requirements, conformity, marking and labelling

BS EN 934-6 Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity

BS 8000-0 Workmanship on construction sites. Introduction and general principles

Waterproofing

BS 8000-0 Workmanship on construction sites. Introduction and general principles

Concrete

ASTM C33 / C33M – 16 Standard Specification for Concrete AggregatesASTM C33 / C33M – 16 Standard Specification for Concrete Aggregates ASTM C33 / C33M – 16 Standard Specification for Concrete AggregatesASTM C87 / C87M – 10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

ASTM C94 / C94M – 15b Standard Specification for Ready-Mixed Concrete

ASTM C109 / C109M – 16a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

ASTM C115 / C115M – 10e1 Standard Test Method for Fineness of Portland Cement by the Turbidimeter

ASTM C125-13a Standard Terminology Relating to Concrete and Concrete Aggregates

ASTM C136 / C136M – 14 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C150-07 Standard Specification for Portland Cement (Withdrawn)

ASTM C295 / C295M – 12 Standard Guide for Petrographic Examination of Aggregates for Concrete / ASTM C115 / C115M – 10e1 Standard Test Method for Fineness of Portland Cement by the Turbidimeter / ASTM C125-15b Standard Terminology Relating to Concrete and Concrete Aggregates / ASTM C150-07 Standard Specification for Portland CementASTM C295 / C295M – 12 Standard Guide for Petrographic Examination of Aggregates for Concrete / ASTM C305 – 14 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

ASTM C348 – 14 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

ASTM C349 – 14 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

ASTM C452 – 15 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to SulfateASTM C452 – 15 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

ASTM C494 / C494M – 15a Standard Specification for Chemical Admixtures for Concrete

ASTM C597 – 09 Standard Test Method for Pulse Velocity Through Concrete

ASTM C642 – 13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

ASTM C778 – 13 Standard Specification for Standard SandASTM C778 – 13 Standard Specification for Standard Sand

ASTM C805 / C805M – 13a Standard Test Method for Rebound Number of Hardened Concrete

ASTM C1038 / C1038M – 14b Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water

Waterproofing

ASTM D5295 / D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5957  Standard Guide for Flood Testing Horizontal Waterproofing Installations

Concrete

AS 1012.1 Methods of testing concrete – Sampling of concrete / AS 1012.2 Methods of testing concrete – Preparing concrete mixes in the laboratory / AS 1012.3.1 Methods of testing concrete – Determination of properties related to the consistency of concrete – Slump test / AS 1012.3.2 Methods of testing concrete – Determination of properties related to the consistency of concrete – Compacting factor test / AS 1012.3.3 Methods of testing concrete – Determination of properties related to the consistency of concrete – Vebe test / AS 1012.3.4 Methods of testing concrete – Determination of properties related to the consistency of concrete – Compactibility index / AS 1012.3.5 Methods of testing concrete – Determination of properties related to the consistency of concrete – Slump flow, T500 and J-ring test / AS 1012.4.1 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring reduction in concrete volume with increased air pressure / AS 1012.4.2 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring reduction in air pressure in chamber above concrete / AS 1012.4.3 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring air volume when concrete is dispersed in water / AS 1012.5 Methods of testing concrete – Determination of mass per unit volume of freshly mixed concrete / AS 1012.5 Methods of testing concrete – Determination of mass per unit volume of freshly mixed concrete / AS 1012.6 Methods of testing concrete – Determination of bleeding of concrete / AS 1012.8.1 Methods of testing concrete – Method for making and curing concrete – Compression and indirect tensile test specimens / AS 1012.8.2 Methods of testing concrete – Method for making and curing concrete – Flexure test specimens / AS 1012.13 Methods of testing concrete – Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory / AS 1012.14 Methods of testing concrete – Method for securing and testing cores from hardened concrete for compressive strength / AS 1012.15 Methods of testing concrete – Method for the estimation of portland cement content of hardened concrete / AS 1012.16 Methods of testing concrete – Determination of creep of concrete cylinders in compression / AS 1012.17 Methods of testing concrete – Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens / AS 1012.18 Methods of testing concrete – Determination of setting time of fresh concrete, mortar and grout by penetration resistance / AS 1012.19.1 Methods of testing concrete – Accelerated curing of concrete compression test specimens – Hot water method / AS 1012.19.2 Methods of testing concrete – Accelerated curing of concrete compression test specimens – Warm water method / AS 1012.20 Methods of testing concrete – Determination of chloride and sulfate in hardened concrete and concrete aggregates / DR AS 1012.20.1 Methods of testing concrete – Determination of chloride and sulfate in hardened concrete and aggregates – Nitric acid extraction method / DR2 AS 1012.20.2 Methods of testing concrete – Determination of water-soluble chloride in aggregates and hardened concrete / DR2 AS 1012.20.2 Methods of testing concrete – Determination of water-soluble chloride in aggregates and hardened concrete / AS 1012.21 Methods of testing concrete – Determination of water absorption and apparent volume of permeable voids in hardened concrete / Methods of testing concrete – Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 1012.10 Methods of testing concrete – Determination of indirect tensile strength of concrete cylinders (‘Brasil’ or splitting test)
AS 1012.18 Methods of testing concrete – Determination of setting time of fresh concrete, mortar and grout by penetration resistance
concreteAS 1379-2007/Amdt 1 Specification and supply of concrete – AS 1379 Specification and supply of concrete
AS 1478.1 Chemical admixtures for concrete, mortar and grout – Admixtures for concrete

AS 1478.2 Chemical admixtures for concrete, mortar and grout – Methods of sampling and testing admixtures for concrete, mortar and grout

AS 1478.2 Chemical admixtures for concrete, mortar and grout – Methods of sampling and testing admixtures for concrete, mortar and grout

AS 2350.12 Methods of testing portland, blended and masonry cements – Preparation of a standard mortar and moulding of specimens

AS 2350.13 Methods of testing portland, blended and masonry cements – Determination of drying shrinkage of cement mortars

AS 2350.14 Methods of testing portland, blended and masonry cements – Length change of cement mortars exposed to sulfate solution

AS 2550.15 Cranes – Safe use – Concrete placing equipment

AS 3600 Concrete structures

AS 3648 : Specification and methods of test for packaged concrete mixes

Concrete

SS EN 197 – 1 Cement – Part 1 : Composition, specifications and conformity criteria for common cement/ SS EN 197 – 2 Cement – Part 2 : Conformity evaluation

SS EN 12620 Specification for aggregates for concrete

SS EN 206 Concrete. Specification, performance, production and conformity/ SS 544 series – Concrete – Complementary Singapore Standard to SS EN 206-1

SS EN 934 – 1 Admixtures for concrete, mortar and grout – Common requirements/ SS EN 934 – 2 Admixtures for concrete, mortar and grout – Part 2 : Definitions, requirements – Concrete admixtures – Definitions, requirements, conformity, marking and labelling/ SS EN 934 – 6  Admixtures for concrete, mortar and grout – Sampling, conformity control and evaluation of conformity

Waterproofing

SS CP 82 – Code of practice- waterproofing of reinforced concrete buildings

Concrete

ISO 1920-3 Testing of concrete — Part 3: Making and curing test specimens

ISO 1920-1 Testing of concrete — Part 1: Sampling of fresh concrete

ISO 3766 Construction drawings — Simplified representation of concrete reinforcement

ISO 3893 Concrete — Classification by compressive strength

ISO 1920-4 Testing of concrete — Part 4: Strength of hardened concrete

ISO 4103 Concrete — Classification of consistency

ISO 4635 Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification

ISO 6274 Concrete — Sieve analysis of aggregates

ISO 1920-5 Testing of concrete — Part 5: Properties of hardened concrete other than strength

ISO 1920-2 Testing of concrete — Part 2: Properties of fresh concrete

ISO 6782 Aggregates for concrete — Determination of bulk density

ISO 6783 Coarse aggregates for concrete — Determination of particle density and water absorption — Hydrostatic balance method

ISO 1920-10 Testing of concrete — Part 10: Determination of static modulus of elasticity in compression

ISO 7033 Fine and coarse aggregates for concrete — Determination of the particle mass-per-volume and water absorption — Pycnometer method / ISO 7033 Fine and coarse aggregates for concrete — Determination of the particle mass-per-volume and water absorption — Pycnometer method

Reinforcement

ISO 6934-1 Steel for the prestressing of concrete — Part 1: General requirements

ISO 6934-2 Steel for the prestressing of concrete — Part 2: Cold-drawn wire

ISO 6934-3 Steel for the prestressing of concrete — Part 3: Quenched and tempered wire

ISO 6934-4 Steel for the prestressing of concrete — Part 4: Strand

ISO 6934-5 Steel for the prestressing of concrete — Part 5: Hot-rolled steel bars with or without subsequent processing

ISO 6935-1 Steel for the reinforcement of concrete — Part 1: Plain bars

ISO 6935-2 Steel for the reinforcement of concrete — Part 2: Ribbed bars

ISO 6935-3 Steel for the reinforcement of concrete — Part 3: Welded fabric

Piping

ISO 265-1 Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)

ISO 768 Fibre building boards — Determination of bending strength (Withdrawn) (Withdrawn)

ISO 769 Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water(Withdrawn)

ISO 818 Fibre building boards — Definition — Classification (Withdrawn)

ISO 820 Particle boards — Definition and classification (Withdrawn)

ISO 2695 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Appearance, shape and dimensional tolerances (Withdrawn)

ISO 2696 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Water absorption and swelling in thickness (Withdrawn)

ISO 3114 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply – Extractability of lead and tin – Test method

ISO 3340 Fibre building boards — Determination of sand content

ISO 3474 Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity (Withdrawn) (Withdrawn)

ISO 3546 Fibre building boards — Determination of surface finish (roughness) (Withdrawn)

ISO 3603 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness

ISO 3633 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)

ISO 3729 Fibre building boards — Determination of surface stability (Withdrawn)

ISO/TR 4191 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation

ISO 1452-1 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General

ISO 1452-2 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes

ISO 1452-3 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings

ISO 1452-4 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves

ISO 1452-5 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system

ISO 4439 Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density

ISO 6308 Gypsum plasterboard — Specification (Withdrawn)

ISO 1452-3 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings

ISO 6594 Cast iron drainage pipes and fittings — Spigot series

ISO 6992 Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities (Withdrawn)

ISO 8283-1 Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)

ISO 8283-2 Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)

ISO 8283-3 Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)

ISO 8283-4 Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)

ISO 13844 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

ISO 13845 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection