Case 2
- Introduction
- Causes of Defects
- Good Practices
- Standards
- Maintenance and Diagnostics
- Remedial
- Similar Cases
- References
Standards
British Standards
Glass
BS 952 Glass for glazing.
- Part 1 Classification
- Part 2 Terminology for work on glass
BS 6262 Glazing for buildings.
- Part 1 General methodology for the selection of glazing
- Part 2 Code of practice for energy, light and sound
- Part 3 Code of practice for fire, security and wind loading
- Part 4 Code of practice for safety related to human impact
- Part 6 Code of practice for special applications
- Part 7 Code of practice for the provision of information
BS 7603 Method for determination of stresses in glass-to-glass sealings
BS 8000 Part 0 Workmanship on construction sites. Introduction and general principles
BS EN 410 Glass in building. Determination of luminous and solar characteristics of glazing
BS EN 1288 Glass in building. Determination of the bending strength of glass.
- Part 3 Test with specimen supported at two points (four point bending)
- Part 5 Coaxial double ring test on flat specimens with small test surface areas
BS EN 1748 Part 1-1 Glass in building. Special basic products. Borosilicate glasses. Definition and general physical and mechanical properties
BS EN ISO 10077 Part 1 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance – General
BS EN ISO 12543 Glass in building. Laminated glass and laminated safety glass
- Part 1 Vocabulary and description of component parts
- Part 3 Laminated glass
- Part 4 Test methods for durability
- Part 5 Dimensions and edge finishing
- Part 6 Appearance
BS EN ISO 14438 Glass in building. Determination of energy balance value. Calculation method
Sealants
BS EN ISO 11431 Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
BS ISO 13640 Buildings and civil engineering works. Sealants. Specifications for test substrates
American Society for Testing and Materials
Glass
ASTM C158 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1036 Standard Specification for Flat Glass
ASTM E903 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E1300 Standard Practice for Determining Load Resistance of Glass in Buildings
Sealant
ASTM C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
ASTM C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM C1193 Standard Guide for Use of Joint Sealants
ASTM C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing
ASTM C1401 Standard Guide for Structural Sealant Glazing
Australian Standards
Glass
AS 1288 Glass in buildings – Selection and installation
AS/NZS 4667 Quality requirements for cut-to-size and processed glass
AS/NZS 4668 Glossary of terms used in the glass and glazing industry
Singapore Standards
Glass
SS 341 Safety glazing materials for use in buildings (human impact considerations)
International Organization for Standardization
Glass
ISO 9050 Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 10291 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Guarded hot plate method
ISO 10292 Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing
ISO 10293 Glass in building — Determination of steady-state U values (thermal transmittance) of multiple glazing — Heat flow meter method
ISO 10345 Glass — Determination of stress-optical coefficient
- Part 1: Tensile test
- Part 2: Bending test
ISO 12543 Glass in building — Laminated glass and laminated safety glass
- Part 1: Definitions and description of component parts
- Part 3: Laminated glass
- Part 4: Test methods for durability
- Part 5: Dimensions and edge finishing
- Part 6: Appearance
ISO 14438 Glass in building — Determination of energy balance value — Calculation method
Sealant
ISO 11431 Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass