Case 3

Standards

[su_tabs]

[su_tab title=”BS”]

Waterproofing

BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

Concrete

BS EN 197-1:2011 Cement. Composition, specifications and conformity criteria for common cements

BS EN 1992-1-1:2004+A1:2014 Eurocode 2: Design of concrete structures. General rules and rules for buildings

BS EN 13139:2002 Aggregates for mortar/ 15/30313572 DC. BS ISO 1920-2. Testing of concrete. Part 2. Properties of fresh concrete/ BS 1881-207:1992. Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests/ BS 1881-124:2015. Testing concrete. Methods for analysis of hardened/ BS 1881-125:2013. Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory/ BS 1881-130:2013. Testing concrete. Method for temperature-matched curing of concrete specimens/ BS 1881-113:2011. Testing concrete. Method for making and curing no-fines test cubes/ BS 1881-119:2011. Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)/ BS 1881-122:2011. Testing concrete. Method for determination of water absorption/ BS 1881-129:2011. Testing concrete. Method for determination of density of partially compacted semi-dry fresh concrete/ BS 1881-131:1998. Testing concrete. Methods for testing cement in a reference concrete/ BS 1881-208:1996. Testing concrete. Recommendations for the determination of the initial surface absorption of concrete/ BS 1881-209:1990. Testing concrete. Recommendations for the measurement of dynamic modulus of elasticity/ BS 1881-204:1988. Testing concrete. Recommendations on the use of electromagnetic covermeters/ BS 1881-206:1986. Testing concrete. Recommendations for determination of strain in concrete/ BS 1881-121:1983. Testing concrete. Method for determination of static modulus of elasticity in compression/ BS EN 12504-2:2012. Testing concrete in structures. Non-destructive testing. Determination of rebound number/ BS 1881-204:1988 Testing concrete. Recommendations on the use of electromagnetic covermeters/ BS 1881-206:1986 Testing concrete. Recommendations for determination of strain in concrete.

BS 812-103.2:1989. Testing aggregates. Method for determination of particle size distribution. Sedimentation testBS 812-121:1989. Testing aggregates. Method for determination of soundness/ BS 812-119:1985. Testing aggregates. Method for determination of acid-soluble material in fine aggregate/ BS 812-112:1990. Testing aggregates. Method for determination of aggregate impact value (AIV)/ BS 812-114:1989. Testing aggregates. Method for determination of the polished-stone value/ BS 812-110:1990. Testing aggregates. Methods for determination of aggregate crushing value (ACV)/ BS 812-111:1990. Testing aggregates. Methods for determination of ten per cent fines value (TFV)/ BS 812-109:1990. Testing aggregates. Methods for determination of moisture content/ BS 812-104:1994. Testing aggregates. Method for qualitative and quantitative petrographic examination of aggregates/ BS 812-123:1999. Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method/ BS 812-2:1995. Testing aggregates. Methods for determination of density/BS EN 932-5:2012 Tests for general properties of aggregates. Common equipment and calibration/ BS 812-124:2009. Testing aggregates. Method for determination of frost heave/

BS EN 12620:2002+A1:2008 Aggregates for concrete

BS 4550-0:1978 Methods of testing cement. General introduction / BS EN 4550-1:2014 Aerospace series. Pipe coupling, 37°. Design configuration. Inch series. Male sealing ends, spherical / BS EN 196-2:2013 Method of testing cement. Chemical analysis of cement / BS EN 196-5:2011 Methods of testing cement. Pozzolanicity test for pozzolanic cement / BS EN 4550-3:2003 Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Port connections / BS 4550-3.1:1978 Methods of testing cement. Physical tests. Introduction / BS EN 196-6:2010 Methods of testing cement. Determination of fineness / BS EN 196-1:2016 Methods of testing cement. Determination of strength / BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete / BS EN 196-3:2005+A1:2008 Methods of testing cement. Determination of setting times and soundness / BS 4550-3.8:1978 Methods of testing cement. Physical tests. Test for heat of hydration / BS EN 4550-4:2014 Aerospace series. Pipe coupling, 37°. Design configuration. Inch series. Female sealing ends / BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete / BS 4550-6:1978 Methods of testing cement. Standard sand for mortar cubesBS EN 1015-7:1999 Methods of test for mortar for masonry. Determination of air content of fresh mortar / BS EN 1015-4:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration) / BS EN 1015-19:1999 Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars / BS EN 1015-1:1999 Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis) / BS EN 1015-2:1999 Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars / BS EN 1015-3:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table) / BS EN 1015-6:1999 Methods of test for mortar for masonry. Determination of bulk density of fresh mortar / BS EN 1015-9:1999 Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar / BS EN 1015-10:1999 Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar / BS 4551:2005+A2:2013 Mortar. Methods of test for mortar and screed. Chemical analysis and physical testing BS 4551:2005+A2:2013 Mortar. Methods of test for mortar and screed. Chemical analysis and physical testing

BS EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout. Admixtures for masonry mortar. Definitions, requirements, conformity and marking and labelling

BS EN 206:2013 Concrete. Specification, performance, production and conformity

BS EN 13791:2007 Assessment of in-situ compressive strength in structures and pre-cast concrete components/ BS 6089:2010 Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791/

BS 6949:1991- Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 7543:2015 Guide to durability of buildings and building elements, products and components / BS ISO 15686-1:2011 Buildings and constructed assets. Service life planning. General principles and framework / BS ISO 15686-3:2002 Buildings and constructed assets. Service life planning. Performance audits and reviews / BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning. Service life prediction procedures

BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

Paints

BS EN ISO 6270-1:2001, BS 3900-F9:2001 Paints and varnishes. Determination of resistance to humidity. Continuous condensation

BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions

BS 6150:2006+A1:2014 Painting of buildings. Code of practice

BS 2992:1970 Specification for painters’ and decorators’ brushes for local authorities and public institutions (excluding quality of fillings)

BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water

BS 3483-A1:1983, ISO 787/1-1982-Methods for testing pigments for paints. Comparison of colour

BS 3483-C7:1980, ISO 787/22-1980-Methods for testing pigments for paints. Comparison of resistance to bleeding

BS 3900-B4:1986, ISO 6503-1984-Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials

BS 3900-F2:1973-Methods of test for paint. Durability tests on paint films. Determination of resistance to humidity (cyclic condensation)

BS 3900-F6:1976-Methods of test for paint. Durability tests on paint films. Notes for guidance on the conduct of natural weathering test

BS EN ISO 11998:2006 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 6949:1991-Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 7664:2000-Specification for undercoat and finishing paints

BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

BS EN ISO 6270-1:2001, BS 3900-F9:2001 Paints and varnishes. Determination of resistance to humidity. Continuous condensation

BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions

BS 6150:2006+A1:2014 Painting of buildings. Code of practice

BS 2992:1970 Specification for painters’ and decorators’ brushes for local authorities and public institutions (excluding quality of fillings)

BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water

BS 3483-A1:1983, ISO 787/1-1982-Methods for testing pigments for paints. Comparison of colour

BS 3483-C7:1980, ISO 787/22-1980-Methods for testing pigments for paints. Comparison of resistance to bleeding

BS 3900-B4:1986, ISO 6503-1984-Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials

BS 3900-F2:1973-Methods of test for paint. Durability tests on paint films. Determination of resistance to humidity (cyclic condensation)

BS 3900-F6:1976-Methods of test for paint. Durability tests on paint films. Notes for guidance on the conduct of natural weathering test

BS EN ISO 11998:2006 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 6949:1991-Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 7664:2000-Specification for undercoat and finishing paints

[/su_tab]

[su_tab title=”ASTM”]

Waterproofing

ASTM D5957 – 98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations

ASTM D5295 / D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5683 / D5683M – 95(2011)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

ASTM D6135-05 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing (Withdrawn 2014)

Concrete

ASTM C33 / C33M – 16 Standard Specification for Concrete Aggregates

ASTM C94 / C94M – 15b Standard Specification for Ready-Mixed Concrete

ASTM C150 / C150M – 15 Standard Specification for Portland Cement

ASTM C597 – 09 Standard Test Method for Pulse Velocity Through Concrete

ASTM C136 / C136M – 14 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

ASTM C642 – 13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

ASTM C805 / C805M – 13a Standard Test Method for Rebound Number of Hardened Concrete

ASTM D5098 – 16 Standard Specification for Artists’ Acrylic Dispersion Paints

ASTM D4258 – 05(2012) Standard Practice for Surface Cleaning Concrete for Coating

ASTM D1640 / D1640M – 14 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings

ASTM D279 – 02(2012) Standard Test Methods for Bleeding of Pigments

ASTM D2574 – 06(2012) Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

ASTM D5324 – 10 Standard Guide for Testing Water-Borne Architectural Coatings

ASTM D5146 – 10 Standard Guide to Testing Solvent-Borne Architectural Coatings

ASTM E1907-06a Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings (Withdrawn 2008)

ASTM D6237 – 09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

[/su_tab]

[su_tab title=”AS”]

Waterproofing

AS 3740-2010/Amdt 1-2012 Waterproofing of domestic wet areas

Concrete

AS 1012.10-2000 (R2014) Methods of testing concrete – Determination of indirect tensile strength of concrete cylinders (‘Brasil’ or splitting test)

AS 1478.2-2005 Chemical admixtures for concrete, mortar and grout – Methods of sampling and testing admixtures for concrete, mortar and grout

AS 1012.1:2014 Methods of testing concrete – Sampling of concrete / AS 1012.2:2014 Methods of testing concrete – Preparing concrete mixes in the laboratory / AS 1012.3.1:2014 Methods of testing concrete – Determination of properties related to the consistency of concrete – Slump test / AS 1012.3.2-1998 (R2014) Methods of testing concrete – Determination of properties related to the consistency of concrete – Compacting factor test / AS 1012.3.3-1998 (R2014) Methods of testing concrete – Determination of properties related to the consistency of concrete – Vebe test / AS 1012.3.4-1998 (R2014) Methods of testing concrete – Determination of properties related to the consistency of concrete – Compactibility index / AS 1012.3.5:2015 Methods of testing concrete – Determination of properties related to the consistency of concrete – Slump flow, T500 and J-ring test / AS 1012.4.1:2014 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring reduction in concrete volume with increased air pressure / AS 1012.4.2:2014 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring reduction in air pressure in chamber above concrete / AS 1012.4.3:2014 Methods of testing concrete – Determination of air content of freshly mixed concrete – Measuring air volume when concrete is dispersed in water / AS 1012.5:2014 Methods of testing concrete – Determination of mass per unit volume of freshly mixed concrete / AS 1012.5:2014 Methods of testing concrete – Determination of mass per unit volume of freshly mixed concrete / AS 1012.6:2014 Methods of testing concrete – Determination of bleeding of concrete / AS 1012.8.1:2014 Methods of testing concrete – Method for making and curing concrete – Compression and indirect tensile test specimens / AS 1012.8.2:2014 Methods of testing concrete – Method for making and curing concrete – Flexure test specimens / AS 1012.13:2015 Methods of testing concrete – Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory / AS 1012.14-1991 Methods of testing concrete – Method for securing and testing cores from hardened concrete for compressive strength / AS 1012.15-1979 Methods of testing concrete – Method for the estimation of portland cement content of hardened concrete / AS 1012.16-1996 (R2014) Methods of testing concrete – Determination of creep of concrete cylinders in compression / AS 1012.17-1997 (R2014) Methods of testing concrete – Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens / AS 1012.18-1996 (R2014) Methods of testing concrete – Determination of setting time of fresh concrete, mortar and grout by penetration resistance / AS 1012.19.1-2000 (R2014) Methods of testing concrete – Accelerated curing of concrete compression test specimens – Hot water method / AS 1012.19.2-2000 (R2014) Methods of testing concrete – Accelerated curing of concrete compression test specimens – Warm water method / AS 1012.20-1992 Methods of testing concrete – Determination of chloride and sulfate in hardened concrete and concrete aggregates / DR AS 1012.20.1:2015 Methods of testing concrete – Determination of chloride and sulfate in hardened concrete and aggregates – Nitric acid extraction method / DR2 AS 1012.20.2:2015 Methods of testing concrete – Determination of water-soluble chloride in aggregates and hardened concrete / DR2 AS 1012.20.2:2015 Methods of testing concrete – Determination of water-soluble chloride in aggregates and hardened concrete / AS 1012.21-1999 (R2014) Methods of testing concrete – Determination of water absorption and apparent volume of permeable voids in hardened concrete / Methods of testing concrete – Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory

Paints

AS/NZS 2310:2002 Glossary of paint and painting terms

AS/NZS 2311:2009 Guide to the painting of buildings

AS 3730.0-2006 Guide to the properties of paints for buildings – General information on the specification, purchasing and testing of paints

AS 3730.100-2006 Guide to the properties of paints for buildings – Introduction and list of guides

HB 73.1-2005 Handbook of Australian Paint Standards – General

HB 73.2-2005 Handbook of Australian Paint Standards – Test methods

AS/NZS 1580.101.1:1999 (R2013) Paints and related materials – Methods of test – – Conditions of test – Temperature, humidity and airflow control

AS/NZS 1580.107.2:1995 Paints and related materials – Methods of test – – Determination of wet film thickness from wet film mass

AS 1580.408.5-2006 Paints and related materials – Methods of test – Adhesion – Pull-off test

AS/NZS 1580.481.1.10:1998 (R2013) Paints and related materials – Methods of test – Coatings – Exposed to weathering – Degree of flaking and peeling

AS/NZS 1580.481.1.13:1998 (Reconfirmed 2013) Methods of test for paints and related materials – Exposed to weathering – Degree of fungal or algal growth

AS/NZS 1580.481.1.9:1998 (R2013) Paints and related materials – Methods of test – Coatings – Exposed to weathering – Degree of blistering

[/su_tab]

[su_tab title=”SS”]

Waterproofing

SS CP 82:1999- Code of practice- waterproofing of reinforced concrete buildings

Concrete

SS EN 197 – 1 : 2014 Cement – Part 1 : Composition, specifications and conformity criteria for common cement/ SS EN 197 – 2 : 2014 Cement – Part 2 : Conformity evaluation

SS EN 12620 : 2008 Specification for aggregates for concrete

SS 32 Series – Welded steel fabric for the reinforcement of concrete

SS 117 : 1975 HOT DIP GALVANIZED COATINGS ON IRON AND STEEL ARTICLES (REFER TO ISO 1460 AND ISO 1461)

SS EN 206 : 2014 Concrete. Specification, performance, production and conformity/ SS 544 series – Concrete – Complementary Singapore Standard to SS EN 206-1

SS EN 934 – 1 : 2008 (2015) Admixtures for concrete, mortar and grout – Common requirements/ SS EN 934 – 2 : 2015 Admixtures for concrete, mortar and grout – Part 2 : Definitions, requirements – Concrete admixtures – Definitions, requirements, conformity, marking and labelling/ SS EN 934 – 6 : 2008 (2015) Admixtures for concrete, mortar and grout – Sampling, conformity control and evaluation of conformity

Paints

SS 542 : 2008 Code of practice for painting of buildings

SS 5 Series – Methods of test for paints, varnishes and related materials

SS 7 : 1998 Paint – Finishing, gloss enamel

SS 34 : 1998 Undercoat paint for gloss enamel

SS 150 : 1998 Emulsion paints for decorative purposes

[/su_tab]

[su_tab title=”ISO”]

Concrete

ISO 1920-3:2004 Testing of concrete — Part 3: Making and curing test specimens

ISO 1920-1:2004 Testing of concrete — Part 1: Sampling of fresh concrete

ISO 3766:2003 Construction drawings — Simplified representation of concrete reinforcement

ISO 3893:1977 Concrete — Classification by compressive strength

ISO 1920-4:2005 Testing of concrete — Part 4: Strength of hardened concrete

ISO 4103:1979 Concrete — Classification of consistency

ISO 4635:2011 Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification

ISO 1920-2:2005 Testing of concrete — Part 2: Properties of fresh concrete

ISO 6274:1982 Concrete — Sieve analysis of aggregates

ISO 1920-5:2004 Testing of concrete — Part 5: Properties of hardened concrete other than strength

ISO 6782:1982 Aggregates for concrete — Determination of bulk density

ISO 6783:1982 Coarse aggregates for concrete — Determination of particle density and water absorption — Hydrostatic balance method

ISO 1920-10:2010 Testing of concrete — Part 10: Determination of static modulus of elasticity in compression

Steel

ISO 6934-1:1991 Steel for the prestressing of concrete — Part 1: General requirements

ISO 6934-2:1991 Steel for the prestressing of concrete — Part 2: Cold-drawn wire

ISO 6934-3:1991 Steel for the prestressing of concrete — Part 3: Quenched and tempered wire

ISO 6934-4:1991 Steel for the prestressing of concrete — Part 4: Strand

ISO 6934-5:1991 Steel for the prestressing of concrete — Part 5: Hot-rolled steel bars with or without subsequent processing

ISO 6935-1:2007 Steel for the reinforcement of concrete — Part 1: Plain bars

ISO 6935-2:2015 Steel for the reinforcement of concrete — Part 2: Ribbed bars

ISO 6935-3:1992 Steel for the reinforcement of concrete — Part 3: Welded fabric
ISO 7033:1987 Fine and coarse aggregates for concrete — Determination of the particle mass-per-volume and water absorption — Pycnometer method
ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete

ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

Paints

ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples

ISO 1514:2004 Paints and varnishes — Standard panels for testing

ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method

ISO 9117-3:2010 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini

ISO 1518-1:2011 Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)

ISO 1520:2006 – Paints and varnishes — Cupping test

ISO 1522:2006 Paints and varnishes — Pendulum damping test

ISO 1523:2002 Determination of flash point — Closed cup equilibrium method

ISO 1524:2013 Paints, varnishes and printing inks — Determination of fineness of grind

ISO 2409:2013 Paints and varnishes — Cross-cut test

ISO 2431:2011 Paints and varnishes — Determination of flow time by use of flow cups

ISO 2808:2007 Paints and varnishes — Determination of film thickness

ISO 2810:2004 Paints and varnishes — Natural weathering of coatings — Exposure and assessment

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method

ISO 2811-2:2011 Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method

ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method

ISO 2811-4:2011 Paints and varnishes — Determination of density — Part 4: Pressure cup method

ISO 2812-1:2007 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water

ISO 2812-2:2007 Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

ISO 2814:1973 Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour (Withdrawn)

ISO 2815:2003 Paints and varnishes — Buchholz indentation test

ISO 2884-1:1999 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear

ISO 3231: 1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide

ISO 3233-1:2013 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

ISO 3248: 1998 Paints and varnishes — Determination of the effect of heat

ISO 3251:2008 Paints, varnishes and plastics — Determination of non-volatile-matter content

ISO 4618:2014 Paints and varnishes — Terms and definitions

ISO 4618-2:1999 Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms relating to paint characteristics and properties (Withdrawn)

ISO 4618-3:1999 Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application (Withdrawn)

ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion

ISO 4628-1:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 4628-2:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

ISO 4628-3:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

ISO 4628-4:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

ISO 6270-1: 1998 Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation

ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter / ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter

ISO 6441-1:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length (Withdrawn)

ISO 6441-2:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load

ISO 6503: 1984 Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method

ISO 6504-1:1983 Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints

ISO 6504-3:2006 Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

ISO 6713: 1984 Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form

ISO 6744-1: 1999 Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test

ISO 6744-2:1999 Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content

ISO 6744-3:1999 Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content

ISO 6744-4: 1999 Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content

ISO 6860:2006 Paints and varnishes — Bend test (conical mandrel)

ISO 7142:2007 Binders for paints and varnishes — Epoxy resins — General methods of test

ISO 7143:2007 Binders for paints and varnishes — Methods of test for characterizing water-based binders

ISO 7783:2011 Paints and varnishes — Determination of water-vapour transmission properties — Cup method

ISO 7784-1:2016 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen

ISO 7784-2:2016 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

ISO 7784-3:2016 Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall

ISO 9514:2005 Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing

ISO 11503:1995 Paints and varnishes — Determination of resistance to humidity (intermittent condensation)

Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance UV

ISO 11668:1997 Binders for paints and varnishes — Chlorinated polymerization resins — General methods of test

ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method

ISO 11890-2:2013 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method
ISO 11908: 1996 Binders for paints and varnishes — Amino resins — General methods of test

ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test

ISO 11997-1:2005 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 11998:2006 Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

ISO 12137:2011 Paints and varnishes — Determination of mar resistance

ISO 1518-2:2011 Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method

ISO 14680-1:2000 Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method

ISO 14680-2: 2000 Paints and varnishes — Determination of pigment content — Part 2: Ashing method

ISO 14680-3: 2000 Paints and varnishes — Determination of pigment content — Part 3: Filtration method

ISO 15184:2012 Paints and varnishes — Determination of film hardness by pencil test

[/su_tab]

[/su_tabs]