Case 1
- Introduction
- Causes of Defects
- Good Practices
- Standards
- Maintenance and Diagnostics
- Remedial
- Similar Cases
- References
References
[1] Philbin, Tom (1997) Painting, staining, and finishing, New York : McGraw-Hill.
[2] http://www.porterpaints.com/faqs/probsolut.html
[3] Guy E. Weismantel (1981) Paint handbook, New York : McGraw-Hill .
[4] Swaraj Paul (1996) Surface coatings : science & technology, New York : J. Wiley, 2nd ed.
[5] Dieter Stoye and Werner Freitag (1998) Paints, coatings, and solvents, Weinheim ; New York : 2nd ed,
[6] Fulcher, A; Rhodes, B; Steward, W (1990) Painting and Decorating- An Information Manual; BSP Professional Books, Oxford.
[7] Building and Construction Authority (2001) Good Industry Practices –Painting. Singapore.
[8] Singapore Standards (1981) CP 22- Code of Practice for the Painting of Buildings, Singapore Standards, Productivity and Innovation Board, Singapore.
[9] British Standards (1991) BS 6150: Code of Practice for Painting of Buildings, British Standards Institution, London.
[10] SS CP 82: Waterproofing of reinforced concrete buildings (1999) Singapore Productivity and Standard Board, Singapore.
[11] Good industry practice: Waterproofing of internal wet areas (2001), Building Construction Authority, Singapore.
[12] BS 8000-Part4:1989- Workmanship on building sites. Code of practice for waterproofing
[13] Application of Infrared Thermography for Damage Detection in Structural Concrete – a Preliminary Report by J.K.C. Shih, Ming Hsin (Institute of Technology), R. Delpak, C.W. Hu, P. Plassmann (University of Glamorgan, UK), Wawrzynek, M. Kogut (Technical University of Silesia, Poland) http://www.ndt.net/article/v05n02/shih/shih.htm
[14] Xavier P.V.M. (1994) Infrared Methodology and Technology, Gordon and Breach Science Publishers, U.S.A, Langhorne, Pa.