Case 2

Standards

[su_tabs]

[su_tab title=”BS”]

Paints

BS EN ISO 6270-1:2001, BS 3900-F9:2001 Paints and varnishes. Determination of resistance to humidity. Continuous condensation

BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions

BS 6150:2006+A1:2014 Painting of buildings. Code of practice

BS 2992:1970 Specification for painters’ and decorators’ brushes for local authorities and public institutions (excluding quality of fillings)

BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water

BS 3483-A1:1983, ISO 787/1-1982-Methods for testing pigments for paints. Comparison of colour

BS 3483-C7:1980, ISO 787/22-1980-Methods for testing pigments for paints. Comparison of resistance to bleeding

BS 3900-B4:1986, ISO 6503-1984-Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials

BS 3900-F2:1973-Methods of test for paint. Durability tests on paint films. Determination of resistance to humidity (cyclic condensation)

BS 3900-F6:1976-Methods of test for paint. Durability tests on paint films. Notes for guidance on the conduct of natural weathering test

BS EN ISO 11998:2006 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 6949:1991-Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 7664:2000-Specification for undercoat and finishing paints

BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

BS EN ISO 6270-1:2001, BS 3900-F9:2001 Paints and varnishes. Determination of resistance to humidity. Continuous condensation

BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions

BS 6150:2006+A1:2014 Painting of buildings. Code of practice

BS 2992:1970 Specification for painters’ and decorators’ brushes for local authorities and public institutions (excluding quality of fillings)

BS 3416:1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water

BS 3483-A1:1983, ISO 787/1-1982-Methods for testing pigments for paints. Comparison of colour

BS 3483-C7:1980, ISO 787/22-1980-Methods for testing pigments for paints. Comparison of resistance to bleeding

BS 3900-B4:1986, ISO 6503-1984-Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials

BS 3900-F2:1973-Methods of test for paint. Durability tests on paint films. Determination of resistance to humidity (cyclic condensation)

BS 3900-F6:1976-Methods of test for paint. Durability tests on paint films. Notes for guidance on the conduct of natural weathering test

BS EN ISO 11998:2006 Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings

BS EN ISO 4628-2:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering

BS EN ISO 4628-5:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking

BS 4800:2011 Schedule of paint colours for building purposes

BS 6949:1991-Specification for bitumen-based coatings for cold application excluding use in contact with potable water

BS 7664:2000-Specification for undercoat and finishing paints

Waterproofing

BS 8000-0:2014 Workmanship on construction sites. Introduction and general principles

[/su_tab]

[su_tab title=”ASTM”]

Paints

ASTM D5098 – 16 Standard Specification for Artists’ Acrylic Dispersion Paints

ASTM D4258 – 05(2012) Standard Practice for Surface Cleaning Concrete for Coating

ASTM D1640 / D1640M – 14 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings

ASTM D279 – 02(2012) Standard Test Methods for Bleeding of Pigments

ASTM D2574 – 06(2012) Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms

ASTM D5324 – 10 Standard Guide for Testing Water-Borne Architectural Coatings

ASTM D5146 – 10 Standard Guide to Testing Solvent-Borne Architectural Coatings

ASTM E1907-06a Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings (Withdrawn 2008)

ASTM D6237 – 09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

Waterproofing

ASTM D5957 – 98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations

ASTM D5295 / D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

ASTM D5683 / D5683M – 95(2011)e1 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

ASTM D6135-05 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing (Withdrawn 2014)

[/su_tab]

[su_tab title=”AS”]

Paints

AS/NZS 2310:2002 Glossary of paint and painting terms

AS/NZS 2311:2009 Guide to the painting of buildings

AS 3730.0-2006 Guide to the properties of paints for buildings – General information on the specification, purchasing and testing of paints

AS 3730.100-2006 Guide to the properties of paints for buildings – Introduction and list of guides

HB 73.1-2005 Handbook of Australian Paint Standards – General

HB 73.2-2005 Handbook of Australian Paint Standards – Test methods

AS/NZS 1580.101.1:1999 (R2013) Paints and related materials – Methods of test – – Conditions of test – Temperature, humidity and airflow control

AS/NZS 1580.107.2:1995 Paints and related materials – Methods of test – – Determination of wet film thickness from wet film mass

AS 1580.408.5-2006 Paints and related materials – Methods of test – Adhesion – Pull-off test

AS/NZS 1580.481.1.10:1998 (R2013) Paints and related materials – Methods of test – Coatings – Exposed to weathering – Degree of flaking and peeling

AS/NZS 1580.481.1.13:1998 (Reconfirmed 2013) Methods of test for paints and related materials – Exposed to weathering – Degree of fungal or algal growth

AS/NZS 1580.481.1.9:1998 (R2013) Paints and related materials – Methods of test – Coatings – Exposed to weathering – Degree of blistering

Waterproofing

AS 3740-2010/Amdt 1-2012 Waterproofing of domestic wet areas

[/su_tab]

[su_tab title=”SS”]

Paints

SS 542 : 2008 Code of practice for painting of buildings

SS 5 Series – Methods of test for paints, varnishes and related materials

SS 7 : 1998 Paint – Finishing, gloss enamel

SS 34 : 1998 Undercoat paint for gloss enamel

SS 150 : 1998 Emulsion paints for decorative purposes

CP 82 : 1999 Code of practice for waterproofing of reinforced concrete buildings

SS 345: 1990 Algae resistant emulsion paint for decorative purposes

Waterproofing

SS CP 82:1999- Code of practice- waterproofing of reinforced concrete buildings

[/su_tab]

[su_tab title=”ISO”]

Paints

ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples

ISO 1514:2004 Paints and varnishes — Standard panels for testing

ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method

ISO 9117-3:2010 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini

ISO 1518-1:2011 Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)

ISO 1520:2006 – Paints and varnishes — Cupping test

ISO 1522:2006 Paints and varnishes — Pendulum damping test

ISO 1523:2002 Determination of flash point — Closed cup equilibrium method

ISO 1524:2013 Paints, varnishes and printing inks — Determination of fineness of grind

ISO 2409:2013 Paints and varnishes — Cross-cut test

ISO 2431:2011 Paints and varnishes — Determination of flow time by use of flow cups

ISO 2808:2007 Paints and varnishes — Determination of film thickness

ISO 2810:2004 Paints and varnishes — Natural weathering of coatings — Exposure and assessment

ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method

ISO 2811-2:2011 Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method

ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method

ISO 2811-4:2011 Paints and varnishes — Determination of density — Part 4: Pressure cup method

ISO 2812-1:2007 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water

ISO 2812-2:2007 Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

ISO 2814:1973 Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour (Withdrawn)

ISO 2815:2003 Paints and varnishes — Buchholz indentation test

ISO 2884-1:1999 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear

ISO 3231: 1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide

ISO 3233-1:2013 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

ISO 3248: 1998 Paints and varnishes — Determination of the effect of heat

ISO 3251:2008 Paints, varnishes and plastics — Determination of non-volatile-matter content

ISO 4618:2014 Paints and varnishes — Terms and definitions

ISO 4618-2:1999 Paints and varnishes — Terms and definitions for coating materials — Part 2: Special terms relating to paint characteristics and properties (Withdrawn)

ISO 4618-3:1999 Paints and varnishes — Terms and definitions for coating materials — Part 3: Surface preparation and methods of application (Withdrawn)

ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion

ISO 4628-1:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 4628-2:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

ISO 4628-3:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

ISO 4628-4:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

ISO 6270-1: 1998 Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation

ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter/ ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter

ISO 6441-1:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length (Withdrawn)

ISO 6441-2:1999 Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load

ISO 6503: 1984 Paints and varnishes — Determination of total lead — Flame atomic absorption spectrometric method

ISO 6504-1:1983 Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints

ISO 6504-3:2006 Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

ISO 6713: 1984 Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form

ISO 6744-1: 1999 Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test

ISO 6744-2:1999 Binders for paints and varnishes — Alkyd resins — Part 2: Determination of phthalic anhydride content

ISO 6744-3:1999 Binders for paints and varnishes — Alkyd resins — Part 3: Determination of unsaponifiable matter content

ISO 6744-4: 1999 Binders for paints and varnishes — Alkyd resins — Part 4: Determination of fatty acid content

ISO 6860:2006 Paints and varnishes — Bend test (conical mandrel)

ISO 7142:2007 Binders for paints and varnishes — Epoxy resins — General methods of test

ISO 7143:2007 Binders for paints and varnishes — Methods of test for characterizing water-based binders

ISO 7783:2011 Paints and varnishes — Determination of water-vapour transmission properties — Cup method

ISO 7784-1:2016 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen

ISO 7784-2:2016 Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

ISO 7784-3:2016 Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall

ISO 9514:2005 Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing

ISO 11503:1995 Paints and varnishes — Determination of resistance to humidity (intermittent condensation)

ISO 16474-1:2013 Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance

ISO 11668:1997 Binders for paints and varnishes — Chlorinated polymerization resins — General methods of test

ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method

ISO 11890-2:2013 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method

ISO 11908: 1996 Binders for paints and varnishes — Amino resins — General methods of test

ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test

ISO 11997-1:2005 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 11998:2006 Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

ISO 12137:2011 Paints and varnishes — Determination of mar resistance

ISO 1518-2:2011 Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method

ISO 14680-1:2000 Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method

ISO 14680-2: 2000 Paints and varnishes — Determination of pigment content — Part 2: Ashing method

ISO 14680-3: 2000 Paints and varnishes — Determination of pigment content — Part 3: Filtration method

ISO 15184:2012 Paints and varnishes — Determination of film hardness by pencil test

ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete

ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

[/su_tab]

[/su_tabs]